Engine (16)

-€37.40
Out of Stock

JIMS Right-Side Crankcase Bushing — Standard Size, 24599-40

Precision right-side crankcase bushing with 360° oiling and U.S.-made construction.

€145.42 €182.82

-€39.47

JIMS Pinion Gear Shaft — JIMS, 24006-54A

Precision pinion gear shaft, made in the U.S.A., designed for reliable drivetrain performance.

€153.55 €193.02

-€45.01

JIMS Pinion Gear Shaft — JIMS, 24007-39

Precision replacement shaft made in the U.S.A.; heat-treated and precision ground for long life. Inspect bearings and seals during installation.

€175.03 €220.04

-€40.26

JIMS Motor Sprocket Shaft — 23909-80, Steel

All ground diameters concentric to within .0003" for easier flywheel trueing and rebuilding. Manufactured from domestic materials. Made in the USA.

€156.57 €196.83

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

-€3.09

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€3.93
Out of Stock

JIMS Cam Cover O-Ring — Large, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€15.31 €19.24

-€1.27

JIMS Cam Cover O-Ring — Small, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€4.97 €6.24

Flywheel-Side Motor Sprocket Shaft Nut — 1-1/8-16 thread

-€11.73

JIMS Flywheel-Side Motor Sprocket Shaft Nut — 1-1/8-16 thread

Heavy-duty nut fits the flywheel-side of the sprocket shaft. Precision threaded for direct fit. Made in the U.S.A.

€24.36 €36.09

-€91.60

FEULING PARTS Race Series® Solid Lifters — 0.835"–0.844" diameter, Oversize...

High-performance solid lifters engineered to stabilize the valvetrain at high rpm, reduce valve float and preserve maximum valve lift. CNC machined; recommended with a high-volume oil pump and heavy-duty adjustable pushrods.

€258.90 €350.50

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company