Engine (16)

-€3.12

KIBBLEWHITE High Chrome Valve Seats — 1.610" ID, 2.070" OD, 0.450" height

Durable High Chrome valve seats offering abrasion and corrosion resistance; machined and ground to precise tolerances as an alternative to powder metal options.

€8.84 €11.96

High Chrome Valve Seats — Inside Dia 1.800", Outside Dia 2.132", Height 0.460", Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside Dia 1.800", Outside Dia...

High-chrome valve seats machined from solid bar stock; alternative to powder metal; 18%–22% chromium, 1%–2% nickel; made in the USA.

€8.84 €11.96

High Chrome Valve Seats — 1.750" ID, 2.135" OD, 0.400" height, Intake

-€3.12

KIBBLEWHITE High Chrome Valve Seats — 1.750" ID, 2.135" OD, 0.400" height,...

High chrome valve seats offering abrasion and corrosion resistance, machined from solid bar stock. Made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside diameter 1.750", Outside diameter 2.163", Height 0.455", Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside diameter 1.750", Outside...

Precision-machined valve seats with 18%–22% chromium and 1%–2% nickel; an alternative to powder metal, made in the USA.

€8.84 €11.96

Valve Spring Kit — installed height 1.555", spring lift 0.630", seat pressure 101 lb

-€235.94

KIBBLEWHITE Valve Spring Kit — installed height 1.555", spring lift...

Progressive Kobe-wound valve springs with F.E.A. design and 1.555" installed height; requires KPMI shortened M-8 or modified stock guides; '23–'25 CVOs should check valve lift for compatibility.

€666.83 €902.77

$Rocker Arm Bushings — Outer 0.6795\", Inner 0.548\", Length 1.065\", 8 pack$

-€8.76

KIBBLEWHITE Rocker Arm Bushings — Outer 0.6795\", Inner 0.548\", Length...

Precision bushings with tapered leads for easy installation. Excellent surface finish; machinable. Made in the USA.

€29.80 €38.56

-€47.82

ANDREWS Adjustable Pushrod Kit — Chromoly Steel, ANDREWS

Adjustable pushrod kit for precise valve-lash setup. Rocker boxes must be removed for installation. Made in the U.S.A.

€185.98 €233.80

-€28.75
Out of Stock

ANDREWS Replacement Pushrod Kit — Aluminum, Set of 4

Fits Shovel engines using stock diameter tubing. For stock stroke applications. Made in the U.S.A.

€111.81 €140.56

-€45.29

CUSTOM CYCLE ENGINEERING Adjustable Front Engine Bracket — Front, Anodized aluminum

Custom slotted bracket with alignment hash marks at 0.05" intervals.

Slides the engine left or right for precise alignment like FXR and early FLT models.

€128.00 €173.29

-€116.83
Out of Stock

CUSTOM CYCLE ENGINEERING Top Stabilizer Link — Top mount, Black, Kit

Adjustable rubber-isolated link that reduces vibration, aligns the powertrain, and replaces the rigid stock metal-to-metal connection.

€330.22 €447.05

-€98.34

CUSTOM CYCLE ENGINEERING Engine Equator II — front mount, black

Corrects chassis misalignment for Dresser bikes; billet bracket replaces forged front bracket, includes slotted bolt pattern and adjustable stabilizing link. Made in the U.S.A.

€382.42 €480.76

-€119.82

CUSTOM CYCLE ENGINEERING Dyna Motor Mount — Front mount, Black

Replaces inadequate stock mounts to improve stability and reduce vibration. Made in the U.S.A.

€465.94 €585.76

-€142.63

CUSTOM CYCLE ENGINEERING Dyna Motor Mount — Rear mount, Black

Replaces inadequate stock mounts and improves stability. Made in the U.S.A.

€554.69 €697.32

-€87.27

CUSTOM CYCLE ENGINEERING Top Stabilizer Link — Top mount, Black

Adjustable rubber-isolated stabilizer link reduces engine vibration, aligns the power train, and replaces the stock metal-to-metal link.

€339.35 €426.62

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

-€26.76

ANDREWS Pushrod Kit — Set of 4, Fixed length

Super-light, heavy-duty fixed-length pushrods; sold as a set of four to replace OE—two intake, two exhaust. Rocker boxes must be removed for installation.

€104.06 €130.82

-€47.82

ANDREWS Adjustable Pushrods — 4 Pack

Replaces nonadjustable stock rods on H-D engines for precise valvetrain control.

€185.98 €233.80

-€7.55

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€11.00

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

-€5.22

BARNETT Scorpion Derby Cover Gasket — 646-30-51090

Replacement gasket for Big Twin Scorpion Derby Cover. Ensures a tight seal to prevent oil leaks during service and operation.

€14.77 €19.99

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine