Engine (16)

High Chrome Valve Seats — 1.700" ID, 2.040" OD, 0.425" height, Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — 1.700" ID, 2.040" OD, 0.425" height,...

High Chrome valve seats machined from solid bar stock, offering superior wear and corrosion resistance; made in the USA.

€8.84 €11.96

-€3.12

KIBBLEWHITE High Chrome Valve Seats — ID 1.750", OD 2.068", Height 0.315"

Precision-machined valve seats with 18%–22% chromium and 1%–2% nickel for enhanced durability; alternative to powder metal; made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside diameter 1.610", Outside diameter 2.070", Seat height 0.450"

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside diameter 1.610", Outside...

Precision machined High Chrome valve seats with chromium-nickel construction for long service life. Made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside Dia 1.800", Outside Dia 2.132", Height 0.460", Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside Dia 1.800", Outside Dia...

High-chrome valve seats machined from solid bar stock; alternative to powder metal; 18%–22% chromium, 1%–2% nickel; made in the USA.

€8.84 €11.96

High Chrome Valve Seats — 1.750" ID, 2.135" OD, 0.400" height, Intake

-€3.12

KIBBLEWHITE High Chrome Valve Seats — 1.750" ID, 2.135" OD, 0.400" height,...

High chrome valve seats offering abrasion and corrosion resistance, machined from solid bar stock. Made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside diameter 1.750", Outside diameter 2.163", Height 0.455", Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside diameter 1.750", Outside...

Precision-machined valve seats with 18%–22% chromium and 1%–2% nickel; an alternative to powder metal, made in the USA.

€8.84 €11.96

Valve Spring Kit — installed height 1.555", spring lift 0.630", seat pressure 101 lb

-€235.94

KIBBLEWHITE Valve Spring Kit — installed height 1.555", spring lift...

Progressive Kobe-wound valve springs with F.E.A. design and 1.555" installed height; requires KPMI shortened M-8 or modified stock guides; '23–'25 CVOs should check valve lift for compatibility.

€666.83 €902.77

$Rocker Arm Bushings — Outer 0.6795\", Inner 0.548\", Length 1.065\", 8 pack$

-€8.76

KIBBLEWHITE Rocker Arm Bushings — Outer 0.6795\", Inner 0.548\", Length...

Precision bushings with tapered leads for easy installation. Excellent surface finish; machinable. Made in the USA.

€29.80 €38.56

-€47.82

ANDREWS Adjustable Pushrod Kit — Chromoly Steel, ANDREWS

Adjustable pushrod kit for precise valve-lash setup. Rocker boxes must be removed for installation. Made in the U.S.A.

€185.98 €233.80

-€28.75
Out of Stock

ANDREWS Replacement Pushrod Kit — Aluminum, Set of 4

Fits Shovel engines using stock diameter tubing. For stock stroke applications. Made in the U.S.A.

€111.81 €140.56

-€3.12

KIBBLEWHITE Valve Seal — 4-pack

Seals for use with intake and exhaust valve guides; choker and lower-tension springs maintain sealing under heat and stress. Made in the United States.

€8.83 €11.95

-€16.85

PRO-ONE PERF.MFG. Millennium Points Cover — Chrome

Custom aluminum cover with ball-milled finish. Sold individually.

€47.61 €64.46

-€18.53
Out of Stock

PRO-ONE PERF.MFG. Chrome Billet Inspection Cover — Smooth

Polished chrome billet inspection cover in ball-end milled or smooth style; includes chrome hardware. Sold each.

€52.38 €70.91

Chrome Billet Inspection Cover — Chrome, Ball-milled, with Forward Controls

-€18.53
Out of Stock

PRO-ONE PERF.MFG. Chrome Billet Inspection Cover — Chrome, Ball-milled, with...

Billet-style inspection cover with included mounting hardware. Sold individually.

€52.38 €70.91

-€48.87

PRO-ONE PERF.MFG. Motor Mount — Chrome, 6061 T-6 aluminum

Precision-machined motor mount with plated finish. Includes mounting hardware; ignition/starter switch sold separately.

€138.15 €187.02

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€10.32

WISECO Replacement Ring Set — Bore 3.198", Oversize +0.010", X-Ring

Includes rings for one piston. Fits pistons of the same design only.

€29.22 €39.54

-€10.32

WISECO Replacement Ring Set — 3.1875" bore, +0.020" oversize, X-Ring

Rings for one piston; install on a matching piston for correct fit.

€29.22 €39.54

-€10.32
Out of Stock

WISECO Replacement Ring Set — 3.218" bore, +0.030" oversize, X-Ring

Includes rings for one piston only. Fits only Wiseco pistons.

€29.22 €39.54

-€10.32

WISECO Replacement Ring Set — 3.447" bore, +0.010" oversize, X-Ring

Replacement rings for a single piston. Confirm piston compatibility before installation.

€29.22 €39.54

-€10.32

WISECO Replacement Ring Set — Bore 3.437", Oversize +0.040", X-Ring

Includes rings for one piston only. Fits matching pistons from the same manufacturer.

€29.22 €39.54

-€26.76

ANDREWS Pushrod Kit — Set of 4, Fixed length

Super-light, heavy-duty fixed-length pushrods; sold as a set of four to replace OE—two intake, two exhaust. Rocker boxes must be removed for installation.

€104.06 €130.82

-€47.82

ANDREWS Adjustable Pushrods — 4 Pack

Replaces nonadjustable stock rods on H-D engines for precise valvetrain control.

€185.98 €233.80

-€7.55

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25
Out of Stock

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

High-Performance Piston Kit — +0.040" oversize, 3.228" bore, 10.0:1 compression

-€76.34

WISECO High-Performance Piston Kit — +0.040" oversize, 3.228" bore,...

Forged high-silicon aluminum piston kit including rings, retainer clips and chrome piston pins for reliable top-end rebuilds.

€216.00 €292.34

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine