Engine (16)

-€6.12
Out of Stock

COMETIC Transmission Bearing Housing Gasket — 0.81 mm (0.032"), 10 Pack

High-quality gaskets for long-term reliability. Does not require gasket sealer. Made in the USA.

€20.76 €26.88

-€19.20
Out of Stock

COMETIC Replacement Seals — Output Gear, Transmission, 10-pack, C9200

Durable replacement seals for long-term reliability. Made in the USA.

€54.32 €73.52

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84
Out of Stock

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

-€8.42
Out of Stock

COMETIC Cam Cover Gasket — 0.81 mm (0.032"), 5 Pack

Durable cam cover gasket engineered for long-term reliability. Multiple types available. Made in the USA.

€23.78 €32.20

V-Twin Top End Gasket Kits — Bore 4.125", Fits 1450–1800 cc, Thickness 0.51 mm (0.020")

-€32.25
Out of Stock

COMETIC V-Twin Top End Gasket Kits — Bore 4.125", Fits 1450–1800 cc,...

EST (Extreme Sealing Technology) gasket kit with embossed stainless steel head, base, and rocker gaskets. Contains all gaskets, seals, and O‑rings to rebuild the top end. Made in the USA.

€91.25 €123.50

Extreme Sealing Technology Complete Gasket Kit — 1.02 mm (0.040"), For '70-'84 Shovelhead

-€31.65
Out of Stock

COMETIC Extreme Sealing Technology Complete Gasket Kit — 1.02 mm...

Complete gasket kit with MLS head gaskets, Steel Viton-coated base gaskets, blue Viton stem seals and AFM exhaust gaskets. Includes motor, primary, derby and inspection cover gaskets. Made in USA.

€89.51 €121.16

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

-€14.11
Out of Stock

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

Extreme Sealing Technology Complete Gasket Kit — 3.250" bore, 0.81 mm (0.032")

-€33.30
Out of Stock

COMETIC Extreme Sealing Technology Complete Gasket Kit — 3.250" bore,...

Complete gasket kit with MLS head gaskets, steel Viton‑coated base gaskets, blue Viton valve stem seals, AFM race-style exhaust gaskets; includes motor, primary, derby and inspection cover gaskets. Made in the USA.

€113.08 €146.38

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50
Out of Stock

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

Extreme Sealing Technology Complete Gasket Kit — 3.625" bore, '70–'84 Shovelhead

-€53.89
Out of Stock

COMETIC Extreme Sealing Technology Complete Gasket Kit — 3.625" bore,...

Complete gasket kit with MLS head gaskets, Viton-coated base gaskets, AFM exhaust gaskets and valve stem seals; made in the USA.

€152.44 €206.33

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26
Out of Stock

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€5.69
Out of Stock

COMETIC Primary Gasket Kit — Primary cover, 1.52 mm (0.060")

Complete primary gasket kit includes gaskets, seals and O-rings for inner and outer primary. High heat resistance, strong shape recovery, no sealer required. Made in USA.

€19.27 €24.96

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€1.14
Out of Stock

COMETIC Rocker Cover Gasket — 0.79 mm thickness, pair

High-quality rocker cover gasket for long-term reliability and fuel resistance. Made in the USA.

€3.19 €4.33

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine