Engine (14)

-€39.47

JIMS Pinion Gear Shaft — JIMS, 24006-54A

Precision pinion gear shaft, made in the U.S.A., designed for reliable drivetrain performance.

€153.55 €193.02

-€45.01

JIMS Pinion Gear Shaft — JIMS, 24007-39

Precision replacement shaft made in the U.S.A.; heat-treated and precision ground for long life. Inspect bearings and seals during installation.

€175.03 €220.04

-€40.26

JIMS Motor Sprocket Shaft — 23909-80, Steel

All ground diameters concentric to within .0003" for easier flywheel trueing and rebuilding. Manufactured from domestic materials. Made in the USA.

€156.57 €196.83

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

-€3.09

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

-€79.01

DRAG SPECIALTIES Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

Heavy-duty, OEM-spec connecting rod assembly supplied as a complete, ready-to-install set.

€223.28 €302.29

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€16.90

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€47.73 €64.63

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94
Out of Stock

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€3.97

DRAG SPECIALTIES Inner Rocker Box Gaskets — 0.190" thickness, inner mount, 10-pack

Replacement inner gasket for rocker box kits. Durable, heat- and oil-resistant material with a precision profile for reliable sealing.

€11.20 €15.17

-€5.13

DRAG SPECIALTIES Front ISO-Mount™ Motor Mount — Black

Urethane motor mount designed to out-last and out-dampen the OEM part. Sold individually.

€14.49 €19.62

-€3.93
Out of Stock

JIMS Cam Cover O-Ring — Large, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€15.31 €19.24

Xl Front Engine Mount Plates — Front, Chrome

-€14.73

DRAG SPECIALTIES Xl Front Engine Mount Plates — Front, Chrome

Durable XL plates for improved alignment and reliable attachment.

€41.61 €56.34

-€1.27

JIMS Cam Cover O-Ring — Small, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€4.97 €6.24

-€7.56

DRAG SPECIALTIES Front Motor Mount Plate — Front, Chrome

Precision-engineered engine mount plate for OEM-fit alignment and easy bolt-on installation.

€21.35 €28.91

-€7.76

DRAG SPECIALTIES Top Motor Mount — Chrome

Secure, precision motor support with direct bolt-on installation and included hardware.

€21.93 €29.69

-€8.27

DRAG SPECIALTIES Top Motor Mount — Chrome

Durable one-piece motor mount with polished finish. Bolts not included.

€23.39 €31.66

-€1.48

DRAG SPECIALTIES Chrome Rocker Oil Line Tube Fitting — Chrome

Replacement oil line tube fitting for Drag Specialties Rocker Oil Lines. Direct replacement, easy installation.

€4.18 €5.66

-€11.01

DRAG SPECIALTIES Heavy-Duty Top Motor Mounts — Chrome

Heavy-duty components, 30% thicker than stock; includes choke/horn brackets and sockethead hardware for select part numbers.

€31.13 €42.14

-€15.56
Out of Stock

DRAG SPECIALTIES Oil Filter Mount — Chrome

Direct-fit oil filter mount with 3/4"-16 adapter and 11/16" threads; installs with OEM hardware.

€43.95 €59.51

Air Cleaner Support Bracket Kit — Chrome, Gray

-€8.34

DRAG SPECIALTIES Air Cleaner Support Bracket Kit — Chrome, Gray

Support bracket kit for mounting an aftermarket air cleaner to the cylinder heads. Includes gaskets and mounting hardware; breather kits/bolts sold separately.

€23.58 €31.92

-€4.10

DRAG SPECIALTIES Air Cleaner Brace — Chrome, fits Keihin and Bendix carburetors

Reduces carburetor vibration to prevent air leaks; includes hardware and template.

€11.59 €15.69

-€7.96

DRAG SPECIALTIES Oil Pump Cover — Chrome

Covers the side and top of the oil pump; installs using two existing mounting points; includes polished hardware.

€22.49 €30.45

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company