Engine (13)

High Chrome Valve Seats — 1.700" ID, 2.040" OD, 0.425" height, Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — 1.700" ID, 2.040" OD, 0.425" height,...

High Chrome valve seats machined from solid bar stock, offering superior wear and corrosion resistance; made in the USA.

€8.84 €11.96

-€3.12

KIBBLEWHITE High Chrome Valve Seats — ID 1.750", OD 2.068", Height 0.315"

Precision-machined valve seats with 18%–22% chromium and 1%–2% nickel for enhanced durability; alternative to powder metal; made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside diameter 1.610", Outside diameter 2.070", Seat height 0.450"

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside diameter 1.610", Outside...

Precision machined High Chrome valve seats with chromium-nickel construction for long service life. Made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside Dia 1.800", Outside Dia 2.132", Height 0.460", Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside Dia 1.800", Outside Dia...

High-chrome valve seats machined from solid bar stock; alternative to powder metal; 18%–22% chromium, 1%–2% nickel; made in the USA.

€8.84 €11.96

High Chrome Valve Seats — 1.750" ID, 2.135" OD, 0.400" height, Intake

-€3.12

KIBBLEWHITE High Chrome Valve Seats — 1.750" ID, 2.135" OD, 0.400" height,...

High chrome valve seats offering abrasion and corrosion resistance, machined from solid bar stock. Made in the USA.

€8.84 €11.96

High Chrome Valve Seats — Inside diameter 1.750", Outside diameter 2.163", Height 0.455", Chromium/Nickel

-€3.12

KIBBLEWHITE High Chrome Valve Seats — Inside diameter 1.750", Outside...

Precision-machined valve seats with 18%–22% chromium and 1%–2% nickel; an alternative to powder metal, made in the USA.

€8.84 €11.96

Valve Spring Kit — installed height 1.555", spring lift 0.630", seat pressure 101 lb

-€235.94

KIBBLEWHITE Valve Spring Kit — installed height 1.555", spring lift...

Progressive Kobe-wound valve springs with F.E.A. design and 1.555" installed height; requires KPMI shortened M-8 or modified stock guides; '23–'25 CVOs should check valve lift for compatibility.

€666.83 €902.77

$Rocker Arm Bushings — Outer 0.6795\", Inner 0.548\", Length 1.065\", 8 pack$

-€8.76

KIBBLEWHITE Rocker Arm Bushings — Outer 0.6795\", Inner 0.548\", Length...

Precision bushings with tapered leads for easy installation. Excellent surface finish; machinable. Made in the USA.

€29.80 €38.56

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€10.32

WISECO Replacement Ring Set — Bore 3.198", Oversize +0.010", X-Ring

Includes rings for one piston. Fits pistons of the same design only.

€29.22 €39.54

-€10.32
Out of Stock

WISECO Replacement Ring Set — 3.1875" bore, +0.020" oversize, X-Ring

Rings for one piston; install on a matching piston for correct fit.

€29.22 €39.54

-€10.32

WISECO Replacement Ring Set — 3.218" bore, +0.030" oversize, X-Ring

Includes rings for one piston only. Fits only Wiseco pistons.

€29.22 €39.54

-€10.32

WISECO Replacement Ring Set — 3.447" bore, +0.010" oversize, X-Ring

Replacement rings for a single piston. Confirm piston compatibility before installation.

€29.22 €39.54

-€10.32

WISECO Replacement Ring Set — Bore 3.437", Oversize +0.040", X-Ring

Includes rings for one piston only. Fits matching pistons from the same manufacturer.

€29.22 €39.54

-€50.01

PINGEL Xl Rear Motor Mount — Rear

Heavy-duty, super-high-tensile alloy construction; reinforced in crack-prone areas; replaces two-bolt and four-bolt top case OEM mounts; fits over studs and starter shaft; made in the U.S.A.

€194.44 €244.45

High-Performance Piston Kit — +0.040" oversize, 3.228" bore, 10.0:1 compression

-€76.34

WISECO High-Performance Piston Kit — +0.040" oversize, 3.228" bore,...

Forged high-silicon aluminum piston kit including rings, retainer clips and chrome piston pins for reliable top-end rebuilds.

€216.00 €292.34

High-Performance Piston Kit — Bore 3.447", Compression Ratio 9.0:1, 1213 cc

-€76.34
Out of Stock

WISECO High-Performance Piston Kit — Bore 3.447", Compression Ratio...

Forged high-silicon aluminum piston kit with X-ring package, rings, chrome pins and retainer clips; made in the USA.

€216.00 €292.34

High-Performance Piston Kit — 3.495" piston, 4-1/4" stroke, 1340 cc

-€84.82

WISECO High-Performance Piston Kit — 3.495" piston, 4-1/4" stroke,...

Complete top-end piston kit with X-Ring package, hardware, and U.S.-made pistons for performance rebuilds.

€239.99 €324.81

$High-Performance Piston Kit — Bore 3.537\", Stroke 4.25\", 9.5:1 compression, 1340 cc$

-€84.82
Out of Stock

WISECO High-Performance Piston Kit — Bore 3.537\", Stroke 4.25\",...

Forged high-silicon aluminum pistons; complete rebuild kit with X‑Ring set and hardware.

€239.99 €324.81

High-Performance Replacement Wrist Pin — 55.9 mm length, 20 mm outside diameter, piston

-€5.69

WISECO High-Performance Replacement Wrist Pin — 55.9 mm length, 20 mm...

High-performance wrist pin designed for improved strength and reduced thermal expansion.

€16.10 €21.79

High-Performance Replacement Wrist Pin — 70 mm length, 20 mm outside diameter

-€5.69

WISECO High-Performance Replacement Wrist Pin — 70 mm length, 20 mm...

Precision replacement wrist pin engineered for high-stress engine use, offering improved strength and thermal stability.

€16.10 €21.79

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine