Engine (11)

-€391.81

S&S CYCLE Super Stock® Big Bore Engine Case — 3.625" bore, Raw

Precision-machined big-bore crankcase kit, machined for EFI; includes hardware, bearings, seals and installation instructions.

€1,523.68 €1,915.49

-€3.09

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

$Steel Breather Gear Kit — Oversized +0.03\", requires matching cam and pinion$

-€38.85

S&S CYCLE Steel Breather Gear Kit — Oversized +0.03\", requires matching...

Includes gear and spacer; requires corresponding cam and pinion; made in the U.S.A.

€151.07 €189.92

-€140.80

S&S CYCLE Heavy-Duty Connecting Rod Sets — Steel

Complete heavy-duty rod set with front and rear rods, crankpin, reinforced cages and roller bearings. Deep-forged and heat-treated; 0.120" wider than stock and fits strokes up to 5.00". Made in the USA.

€547.52 €688.32

Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S CYCLE 34-7011

-€140.80

S&S CYCLE Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S...

Complete kit with front and rear rods, crankpin and nuts, durable cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; rod-to-rod clearance for strokes up to 5.00". Installation may require additional clearancing.

€547.52 €688.32

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€55.83

S&S CYCLE Valve Spring Kit — 0.550" lift, 140 lb seat pressure

Allows additional rocker clearance for '48-'65 Panheads; includes late single bottom collars for S&S and stock late '81-'85 heads; works with stock-style bottom collars and thin-stem valves with thicker keepers.

€217.09 €272.92

-€3.93
Out of Stock

JIMS Cam Cover O-Ring — Large, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€15.31 €19.24

-€1.27

JIMS Cam Cover O-Ring — Small, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€4.97 €6.24

-€3.17
Out of Stock

S&S CYCLE Rep Gasket Base Rocker Cover 4-1/8" — 90-4071-S

Replacement gasket for rocker cover base; fits 4-1/8" openings.

€12.34 €15.51

-€5.22

BARNETT Scorpion Derby Cover Gasket — 646-30-51090

Replacement gasket for Big Twin Scorpion Derby Cover. Ensures a tight seal to prevent oil leaks during service and operation.

€14.77 €19.99

-€14.56

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.875"

Replacement ring set for two pistons, compatible with S&S pistons only.

€56.59 €71.15

Flywheel-Side Motor Sprocket Shaft Nut — 1-1/8-16 thread

-€11.73

JIMS Flywheel-Side Motor Sprocket Shaft Nut — 1-1/8-16 thread

Heavy-duty nut fits the flywheel-side of the sprocket shaft. Precision threaded for direct fit. Made in the U.S.A.

€24.36 €36.09

-€325.30

S&S CYCLE 96" Big Bore Kit — 3.625" bore, 4-5/8" stroke, Black

Complete 96" big bore kit includes cylinders, pistons, rings and gaskets; made in the U.S.A.; requires crankcase boring and a skilled technician for installation.

€1,265.05 €1,590.35

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company