English
Español
- -€7.30
- Out of Stock
€20.60
Regular price
€27.90
+34 636 847 491 (10:00 - 13:30)
Free EU shipping for orders over 150€
Active filters
- -€6.24
- Out of Stock
EASTERN MOTORCYCLE PARTS
Bearing — mainshaft replacement for 5-speed Big Twins
Replacement mainshaft bearing for 5-speed Big Twins. Precision fit for reliable shifting and reduced end play.
€17.66
Regular price
€23.90
- -€13.05
- Out of Stock
EASTERN MOTORCYCLE PARTS
Bearing — mainshaft bearing for 5-speed Big Twins, open end
Replacement mainshaft bearing for 5-speed Big Twins.
€36.86
Regular price
€49.91
- -€5.71
- Out of Stock
EASTERN MOTORCYCLE PARTS
Idler Gear & Circuit Breaker Bushings — Pair
Precision idler gear and circuit breaker bushings engineered for reliable alignment and reduced wear.
€16.17
Regular price
€21.88
- -€5.21
- Out of Stock
€14.70
Regular price
€19.91
- -€2.59
- Out of Stock
EASTERN MOTORCYCLE PARTS
Retaining Ring — 10 pack
Durable stamped retaining ring for reliable axial retention. Made in the U.S.A.
€7.33
Regular price
€9.92
- -€101.56
- Out of Stock
ANDREWS
N2 Grind Cams — Gear, 4 Pack
Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.
€394.98
Regular price
€496.54
- -€94.63
- Out of Stock
ANDREWS
V8 Grind Cams — Chain, 4 Pack
Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.
€368.02
Regular price
€462.65
- -€94.63
- Out of Stock
ANDREWS
N6 Grind Cams Cam Kit — 264° duration, 0.500" lift
Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.
€368.02
Regular price
€462.65
- -€95.89
- Out of Stock
ANDREWS
Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...
Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.
€372.91
Regular price
€468.80
- -€85.84
- Out of Stock
ANDREWS
Cam Set for Chain Drive — Chain Drive, 60 Series, Pair
Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.
€333.84
Regular price
€419.68
- -€44.64
- Out of Stock
ANDREWS
EV72 Cam — fits 92" or larger street motors
High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.
€173.65
Regular price
€218.29
- -€95.89
- Out of Stock
ANDREWS
Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...
Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.
€372.91
Regular price
€468.80
- -€95.89
- Out of Stock
ANDREWS
Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair
Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.
€372.91
Regular price
€468.80
- -€98.37
- Out of Stock
ANDREWS
Cams for Gear Drives — 21 Series, Intake & Exhaust
Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.
€382.53
Regular price
€480.90
- -€95.89
- Out of Stock
ANDREWS
Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...
Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.
€372.91
Regular price
€468.80
- -€44.64
- Out of Stock
€173.65
Regular price
€218.29
- -€94.63
- Out of Stock
ANDREWS
V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...
Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.
€368.02
Regular price
€462.65
- -€94.63
- Out of Stock
ANDREWS
V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°
Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.
€368.02
Regular price
€462.65
- -€39.78
- Out of Stock
ANDREWS
Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear
Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.
€154.70
Regular price
€194.48
- -€44.64
- Out of Stock
ANDREWS
Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear
Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.
€173.65
Regular price
€218.29
- -€44.64
- Out of Stock
€173.65
Regular price
€218.29
- -€39.78
- Out of Stock
€154.70
Regular price
€194.48
- -€52.02
- Out of Stock
ANDREWS
Cam for Big Twin — Intake/Exhaust duration 252°,...
More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.
€202.28
Regular price
€254.30
- -€52.02
- Out of Stock
ANDREWS
EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in
High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.
€202.28
Regular price
€254.30
- -€52.02
- Out of Stock
ANDREWS
EV7 Cam — 266° duration, 0.560" lift
Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.
€202.28
Regular price
€254.30
- -€52.02
- Out of Stock
ANDREWS
Cam for Big Twin — EV38 grind, Exhaust 252°, Intake 238°
Performance cam for Big Twin street and drag bikes. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.
€202.28
Regular price
€254.30
- -€52.02
- Out of Stock
ANDREWS
EV51 Cam — Intake 252°, Exhaust 256°, 0.510" lift
Broad-range EV51 camshaft for modified street motors. 3000–6500 rpm powerband, easy install, works with stock hydraulics. Made in USA. Check clearances.
€202.28
Regular price
€254.30
- -€18.12
- Out of Stock
ANDREWS
Valve Spring Upper Collars — 4-pack
Adds 0.050" more spring travel than stock. Stronger and lighter than stock. Uses stock keepers. Made in the United States.
€70.48
Regular price
€88.60
- -€3.61
- Out of Stock
EASTERN MOTORCYCLE PARTS
Rocker Arm Shaft Spacers — 10 Pack, A-17451-57
Precision-machined components for maintaining valve-train clearance and alignment. Made in the U.S.A.
€10.19
Regular price
€13.80