Engine (10)

-€33.84
Out of Stock

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

-€3.09
Out of Stock

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€34.42
Out of Stock

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

-€79.38
Out of Stock

JIMS Chrome Billet Lifter Covers — Pair

Precision CNC-machined lifter covers. Gaskets and screws included. Made in the United States.

€308.69 €388.07

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11
Out of Stock

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22
Out of Stock

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60
Out of Stock

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€7.55
Out of Stock

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25
Out of Stock

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45
Out of Stock

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17
Out of Stock

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

-€3.93
Out of Stock

JIMS Cam Cover O-Ring — Large, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€15.31 €19.24

-€1.27
Out of Stock

JIMS Cam Cover O-Ring — Small, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€4.97 €6.24

TSM Connector Replacement Seals — 10-pack, for Harley-Davidson TSM

-€3.30
Out of Stock

CUSTOM DYNAMICS TSM Connector Replacement Seals — 10-pack, for Harley-Davidson...

Heavy-duty replacement seals for the Harley-Davidson TSM connector to maintain a watertight connection.

€9.30 €12.60

Flywheel-Side Motor Sprocket Shaft Nut — 1-1/8-16 thread

-€11.73
Out of Stock

JIMS Flywheel-Side Motor Sprocket Shaft Nut — 1-1/8-16 thread

Heavy-duty nut fits the flywheel-side of the sprocket shaft. Precision threaded for direct fit. Made in the U.S.A.

€24.36 €36.09

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company