Engine (10)

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€2.60

EASTERN MOTORCYCLE PARTS Cam Shims — 0.007", 10 pack

Precision shims for accurate cam end play setup. A must when setting up new cams. Made in the USA.

€7.35 €9.95

-€9.32
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — A-25581-36

Precision-machined bushing for cam cover applications. Durable, low-friction design. Made in the U.S.A.

€26.35 €35.67

-€4.69

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — 0.050"

Absorbs axial loads on the camshaft; precision machined and made in the USA.

€13.30 €17.99

-€11.47

EASTERN MOTORCYCLE PARTS Bearing — 5-speed Big Twins, open end, 4-pack

Replacement mainshaft bearing for 5-speed Big Twins; precision fit and durable construction.

€32.43 €43.90

Cam Gear Thrust Washers — 0.075", 5 pack

-€4.69

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — 0.075", 5 pack

Absorbs axial camshaft loads; precision machined and made in the USA.

€13.30 €17.99

Cam Gear Thrust Washers — 0.080" thickness, 5 Pack

-€4.69

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — 0.080" thickness, 5 Pack

Precision-machined thrust washers that absorb axial camshaft loads and reduce wear.

€13.30 €17.99

-€9.39

EASTERN MOTORCYCLE PARTS Bearing — Closed end

Replacement mainshaft bearing for 5-speed Big Twins.

€26.52 €35.91

-€7.30

EASTERN MOTORCYCLE PARTS Bearing — Open End

Replacement mainshaft bearing for 5-speed Big Twins.

€20.60 €27.90

-€6.24

EASTERN MOTORCYCLE PARTS Bearing — mainshaft replacement for 5-speed Big Twins

Replacement mainshaft bearing for 5-speed Big Twins. Precision fit for reliable shifting and reduced end play.

€17.66 €23.90

-€13.05

EASTERN MOTORCYCLE PARTS Bearing — mainshaft bearing for 5-speed Big Twins, open end

Replacement mainshaft bearing for 5-speed Big Twins.

€36.86 €49.91

Idler Gear & Circuit Breaker Bushings — fits '36-'69 Big Twin, '32-'73 45"

-€5.71

EASTERN MOTORCYCLE PARTS Idler Gear & Circuit Breaker Bushings — fits '36-'69 Big Twin,...

Circuit breaker and idler gear bushings for '36-'69 Big Twin
Idler gear bushings for '32-'73 45"
Made in the USA

€16.17 €21.88

-€5.21

EASTERN MOTORCYCLE PARTS Bearing — Closed End

Replacement mainshaft bearing for 5-speed Big Twins.

€14.70 €19.91

Retaining Ring — 4 Speed, Third Gear Main Shaft, Silver

-€2.59

EASTERN MOTORCYCLE PARTS Retaining Ring — 4 Speed, Third Gear Main Shaft, Silver

High-quality OEM replacement component for reliable performance and precise fit.

€7.33 €9.92

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€44.64

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine