Engine (10)

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8 Pack, breather valve

-€8.37

EASTERN MOTORCYCLE PARTS Plastic Breather Valve Washer Set — sizes 0.130–0.165", 8...

Set of washers for breather valves. Use only with plastic breather valves; do not mix plastic and steel parts. Made in the U.S.A.

€23.66 €32.03

-€9.21

EASTERN MOTORCYCLE PARTS Cam Shims — 0.050"–0.095", 10-pack

Precision shims for accurate valve adjustment. Made in the U.S.A.

€26.01 €35.22

-€9.21

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — Standard, A-25586-37

Precision cam cover bushing for reliable valve-train alignment. High-quality OEM components made in the USA.

€26.01 €35.22

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€18.29

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Part No. 15-0127

Complete cam bushing kit with bushings, bearings, lock pins, and thrust plate; standard sizes for easy replacement.

€57.72 €76.01

-€14.95

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — Cam kit, 15-0129

Includes cam and gear shaft bushings/bearings, lock pins, and a thrust plate. All parts are standard sizes. Made in the U.S.A.

€47.19 €62.14

-€23.28

EASTERN MOTORCYCLE PARTS Cam Bushing Kit — 15-0131

Complete kit with cam and gear shaft bushings, bearings, lock pins, and shims. Made in the U.S.A.

€65.81 €89.09

-€9.10

EASTERN MOTORCYCLE PARTS Cam Bushing — Standard, Cam Cover

Precision cam bushing that reduces wear and ensures smooth camshaft operation. High-quality OEM components; made in the USA.

€25.70 €34.80

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

-€22.44

S&S CYCLE Pinion Gear — 1.4729–1.4737 in

Precision-machined, heat-treated pinion gear, finish ground for reliable engagement. Made in the USA.

€87.26 €109.70

-€22.44

S&S CYCLE Pinion Gear — 1.4721"–1.4729"

Precision-machined, heat-treated pinion gear. Made in USA.

€87.26 €109.70

-€4.47

EASTERN MOTORCYCLE PARTS Thrust Washers — 3rd Gear

Precision components that reduce friction and provide reliable axial support. Made in the U.S.A.

€14.12 €18.59

-€2.26

EASTERN MOTORCYCLE PARTS Retaining Ring — Main shaft rollers, 4-speed, 10-pack, Silver

High-quality OEM replacement components for reliable shaft retention. Durable and precise.

€7.16 €9.42

-€28.56

S&S CYCLE Pinion Gear — 1.4475" - 1.4480"

Precision finish-ground pinion gear engineered for reliable drivetrain performance. Made in the United States.

€111.07 €139.63

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

514 Camshaft — 514 Series, 246° duration, 0.540" lift

-€56.21

S&S CYCLE 514 Camshaft — 514 Series, 246° duration, 0.540" lift

Proven S&S 514 camshaft for strong mid-range power (2500–5000 rpm). For 84"–93" motors; ≤9:1. Requires spring spacing and professional installation checks.

€163.64 €219.85

-€51.63

S&S CYCLE 514 Camshaft — 84–93 in³ fitment, 0.540"/0.514" lift

Proven S&S 514 cam for strong midrange power. Fits 84–93 in³ motors; requires spring spacing and clearance checks. Made in USA.

€200.80 €252.43

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine