Electrical & Ignition

-€4.85

NAMZ Intensifier High-Low Module III — 12V, High/Low

Converts single-function LED bulbs into dual-function units for run/stop, run/turn or high/low use. Universal LED fitment up to 500 mA. Not compatible with incandescent or halogen bulbs. Made in the U.S.A.

€18.86 €23.71

-€46.02

NAMZ Run, Brake and Turn Signal Module — 12 V, Black

Converts turn signals into running and brake lights while retaining turn function. Built-in load equalizer handles stock and small custom LEDs. Plug-in connectors and simple instructions for select models. Increases rear visibility. Made in the USA.

€138.05 €184.07

-€13.99

EMGO Ignition Coil — 12V, Chrome, For Honda

Solid core wire spark plug lead; check wiring diagram before installing. Compact ignition coil suitable for many applications.

€39.56 €53.55

-€3.98

NAMZ Mini Toggle Switch — 5 A, Chrome

Compact toggle switch that fits a 1/4" mounting hole; made in the U.S.A.

€11.94 €15.92

-€3.24

NAMZ Mini Toggle Switch — 5 A, Chrome

Fits a 1/4" hole, compact panel-mount design. Made in the U.S.A.

€9.70 €12.94

-€3.24

NAMZ Speedometer/Tripometer Reset Push Button — Black

Compact reset button for speedometer and trip meter. Durable construction, easy installation. Made in the U.S.A.

€9.70 €12.94

-€3.57

NAMZ Rubber Reset Switch Boots — 5-pack, Black

Protects control actuators from moisture, dust and debris. Flexible design for reliable actuation and simple installation.

€10.70 €14.27

-€15.80

DAYTONA CNC 2-Button Switch — DAYTONA Switch, P/N 80918

Compact CNC-aluminum 2-button momentary switch for 22.2 & 25.4 mm handlebars. 12 mm wide, max 50 mA. Wiring can be routed inside or outside the handlebar. Operates VELONA gauges remotely.

€44.66 €60.46

-€16.46

DAYTONA CNC 2-Button Switch for Velona — Width 12mm, 22.2/25.4mm...

CNC aluminum 2-button momentary switch for remote control of VELONA gauges; fits 22.2 and 25.4mm handlebars.

€46.52 €62.98

-€2.32

FLOSSER Horns and Fanfares — 70 mm, 12V

Street-legal horns and fanfares with a galvanized finish. Easy to install and fit virtually all bikes.

€6.53 €8.85

-€2.32

FLOSSER Horns and Fanfares — 70 mm (2-3/4") disk horn, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most motorcycles.

€6.53 €8.85

-€2.52

FLOSSER Horns and Fanfares — 91 mm, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most bikes.

€7.10 €9.62

-€2.52

FLOSSER Horns and Fanfares — 91 mm, High Tone, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit virtually all bikes.

€7.10 €9.62

Horns and Fanfares — 91 mm (3-9/16"), 12V

-€4.55

FLOSSER Horns and Fanfares — 91 mm (3-9/16"), 12V

Street-legal horns and fanfares; easy to install and fit virtually all bikes, with a galvanized finish.

€13.32 €17.87

-€4.54

FLOSSER Horns and Fanfares — 12V

Street-legal horns and fanfares; easy to install and galvanized for a long-lasting finish.

€12.39 €16.93

-€9.77

FLOSSER Horns and Fanfares — 12V, Black

Street-legal horns and fanfares; easy to install; galvanized for a timeless finish.

€27.60 €37.37

-€11.93

FLOSSER Horns and Fanfares — 12V, Chrome

Street-legal horns and fanfares that are easy to install and galvanized for a lasting finish.

€33.69 €45.62

-€10.66

FLOSSER Horns and Fanfares — 12V, Black

Street-legal, galvanized horns and fanfares that fit virtually all bikes—easy to install and built for lasting performance.

€30.14 €40.80

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€118.35

TERRY COMPONENTS Starter Motor — 12V, 1.5 kW, Black

Upgraded Nippondenso assembly with reinforced internal components, CNC-machined mounting noses and full dyno testing; made in the USA.

€460.24 €578.59

-€4.96

NAMZ Starter Relay — 12V, 30A, Black

Dependable starter relay, made in the U.S.A.

€14.90 €19.86

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€2.98

NAMZ 25 Amp Micro Relay/Socket Kit — 25 A, Black

Compact micro kit to replace worn electrical switching components and restore reliable starting performance. Easy plug‑in installation.

€8.94 €11.92

-€1.85

NAMZ 25 Amp Micro Relay/Socket Kit — 25 A, Black

Compact replacement micro relay and socket assembly for quick, clean installations. Durable construction resists vibration and moisture. Plug-and-play wiring simplifies replacement.

€5.57 €7.42

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

Electrical & Ignition

Contact us

Products

Our company