Electrical & Ignition

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€118.35

TERRY COMPONENTS Starter Motor — 12V, 1.5 kW, Black

Upgraded Nippondenso assembly with reinforced internal components, CNC-machined mounting noses and full dyno testing; made in the USA.

€460.24 €578.59

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

Dual USB Port Charger with 1" Ball Mount — 48" cable, 2 A, fits 7/8"–1.25" bars, black

-€19.85

GEARS CANADA Dual USB Port Charger with 1" Ball Mount — 48" cable, 2 A,...

Stylish handlebar-mounted charger with dual USB ports and a 1" ball attachment for RAM-style accessories. Includes long battery cable, water-resistant cap with switch, and spacers to fit 7/8", 1" and 1.25" bars.

€56.13 €75.98

Dual USB Port Charger with 1" Ball Mount — 2 A, 48" cable, Chrome, fits 7/8"–1.25" bars

-€19.85

GEARS CANADA Dual USB Port Charger with 1" Ball Mount — 2 A, 48" cable,...

Handlebar mount with two USB ports and a 1" ball for RAM-compatible accessories; water-resistant cap with hidden switch.

€56.13 €75.98

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

$Hardwire Cable for SPC+ — 150 cm (59\"), 12 V→5 V, 2 A, black$

-€7.15

SP CONNECT Hardwire Cable for SPC+ — 150 cm (59\"), 12 V→5 V, 2 A, black

Weatherproof hardwire cable for connecting an inductive charger to a motorcycle battery; includes an integrated 12 V to 5 V/2 A voltage converter.

€20.23 €27.38

-€15.88

SP CONNECT Charging Module SPC+ — Black

Inductive wireless charger for use with the SPC+ Phone Case. 100% weatherproof. Mounts on all SPC+ bracket heads. USB cable included. Not a power bank.

€44.86 €60.74

-€20.42

SP CONNECT Charging Stand — SPC+, Black, USB

Magnetic phone holder for desk or home use, secure attachment for SPC+ Phone Case, fast 15 W inductive charging, MagSafe® compatible, includes USB cable.

€57.69 €78.11

-€11.33

SP CONNECT Wireless Charging Pad — SPC+, Black

MagSafe® compatible wireless charging pad with foldable stand — fast 15 W charging; includes charging cable.

€32.05 €43.38

-€18.15

SP CONNECT Wireless Power Bank — SPC+, Black

Compact wireless power bank with 10 W output and 5,000 mAh capacity for fast on-the-go charging.

€51.27 €69.42

-€10.65

MUC-OFF AirTag Holder — Black

Secure two-part polymer holder for Apple AirTag with Torx security screws and four silicone clamps for discreet mounting. AirTag not included.

€39.76 €50.41

-€9.07

SP CONNECT Wall Charger 30W — 220V, 1A, Black

Dual-port 30W wall charger with USB-C and USB-A for fast, simultaneous charging. Compact and portable; supports QC 3.0 and PD 3.0.

€25.64 €34.71

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€121.30
Out of Stock

TERRY COMPONENTS Starter Motor — 12V, Chrome

Durable Nippondenso construction with precision components and dyno-tested reliability.
Upgraded solenoid and clutch components for extended service life.

€471.75 €593.05

-€34.91
Out of Stock

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.4 kW, Chrome

Replacement solenoid end cover with integrated starter button. Installs in minutes with OEM hardware. Made in the USA.

€135.74 €170.65

Electrical & Ignition

Contact us

Products

Our company