Electrical & Ignition

Champion Spark Plugs — Thread reach 19 mm (3/4"), Thread size 10 mm, Spark gap 0.8 mm (0.031"), Resistor type

-€1.98

CHAMPION Champion Spark Plugs — Thread reach 19 mm (3/4"), Thread size...

Reliable motorcycle spark plugs with copper-core electrode, fine-wire ignitable electrodes, reduced fouling, and SAC-9 resistor for EMI/RFI suppression.

€1.76 €3.74

Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, heat range 8, RA8HC

-€77.91

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, heat...

Copper-core center electrode for precise heat control, SAC-9 resistor for EMI/RFI suppression, Ultraseal™ shell for rust prevention; made in the USA.

€69.69 €147.60

-€6.54

CHAMPION S-Plug —

Reliable spark plug designed for improved performance, fuel economy and durability.

€5.84 €12.38

Champion Spark Plugs — Resistor type, projected center electrode, platinum tip

-€2.86

CHAMPION Champion Spark Plugs — Resistor type, projected center...

Reliable motorcycle spark plugs with a copper core center electrode, fine-wire electrodes, reduced fouling, and SAC-9 resistor for EMI/RFI suppression.

€2.56 €5.42

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€17.41

TECHNORESEARCH Data Cable — Harley-Davidson®, Red

Data Cable compatible with TR4 VCMs (Centurion, Maximus and Alaris); required for programming '21 and '22 models.

€25.16 €42.57

3 In 1 OBD TR4 Cable — 4-pin, 6-pin & OBD connectors, fits TR4 VCMs '01–'23, Harley Davidson®

-€27.70

TECHNORESEARCH 3 In 1 OBD TR4 Cable — 4-pin, 6-pin & OBD connectors, fits TR4...

Combines old and newer data port styles. Includes 4-pin, 6-pin and OBD connectors; compatible with '01–'23 models. Made in the USA. For use with TR4 VCMs only.

€107.50 €135.20

-€12.14

TECHNORESEARCH Adapter Cable — 12V, Black

Cable for directly sourcing power between the battery and the TRO controller.

€48.86 €61.00

Security Can Retrieval Cable — 12V, Black, Red

-€12.14

TECHNORESEARCH Security Can Retrieval Cable — 12V, Black, Red

CAN security retrieval cable for upgrading VCM-TR4 dealer pack and Centurion Super Pro Plus; includes fuse and fuse holder. Works only with #3807-0499 and #1020-2851.

€48.86 €61.00

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

Copper Plus™ Spark Plug — 14 mm thread, 9.5 mm reach (3/8"), heat range 12

-€3.24

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 9.5 mm reach (3/8"),...

Copper Plus™ spark plug with a copper-core center electrode and Ultraseal™ coating for improved ignition and corrosion resistance.

€2.91 €6.15

Copper Plus™ Spark Plug — 14 mm thread, 11.1 mm reach (7/16"), 17.5 mm hex (11/16"), heat range 8

-€3.13

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 11.1 mm reach (7/16"),...

Copper Plus™ spark plug with copper-core electrode, SAC-9 resistor and Ultraseal™ coated shell; made in the USA.

€2.80 €5.93

Copper Plus™ Spark Plug — 12.7 mm reach, 14 mm thread, Heat Range 82, RL82YC

-€2.79

CHAMPION Copper Plus™ Spark Plug — 12.7 mm reach, 14 mm thread, Heat...

Copper-core spark plug with SAC-9 resistor and Ultraseal™ coating; made in the USA.

€2.49 €5.28

Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, 20.6 mm hex, Heat Range 12

-€2.50

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, 20.6 mm...

Copper Plus™ spark plug: copper-core design for controlled heat range, SAC-9 resistor for EMI/RFI suppression, Ultraseal™ coating for rust prevention. Made in the USA.

€2.24 €4.74

Electrical & Ignition

Contact us

Products

Our company