Electrical & Ignition

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 12V, 30,000V, Black

Original Andrews replacement coil with classic styling and increased spark performance. Made in the U.S.A.

€69.08 €86.84

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 30,000V, Red

Classic-look replacement ignition coil that boosts spark output and improves throttle response. Made in the U.S.A.

€69.08 €86.84

-€7.36

PINGEL Tether Cord with Wristband — Black

Secure tether cord with adjustable wristband for keys and small tools. Made in the USA.

€28.63 €35.99

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

Cigarette Lighter Socket with Cable Harness — 12V 15A, 160 cm, black

-€3.43

SW-MOTECH Cigarette Lighter Socket with Cable Harness — 12V 15A, 160 cm,...

Sealed cigarette lighter outlet with a fully insulated cable harness and rubber seals. Self-install kit including outlet, harness, safety catch and mounting instructions. Mounting plate sold separately.

€13.38 €16.81

USB Double Charging Socket with Cable Harness — 12V, 2A, Black

-€6.01

SW-MOTECH USB Double Charging Socket with Cable Harness — 12V, 2A, Black

Dual USB charging socket with sealed, insulated cable harness for charging GPS units, cameras, smartphones and tablets. Includes double USB socket, cable harness and mounting instructions. Additional mounting plate required.

€23.40 €29.41

USB Double Charging Socket with Universal Plug — 12 V, 2.1 A, Black

-€6.01

SW-MOTECH USB Double Charging Socket with Universal Plug — 12 V, 2.1 A,...

Dual USB sockets for charging smartphones and accessories; universal plug fits cigarette lighter or vehicle outlet. Angled connector housing. Includes one unit.

€23.40 €29.41

Cigarette Lighter Socket Bracket M8 — Black, M8 screws 40/50 mm

-€3.10

SW-MOTECH Cigarette Lighter Socket Bracket M8 — Black, M8 screws 40/50 mm

Secure mount to attach a cigarette lighter outlet to a bar mount using an M8 screw. Quick installation, flexible alignment; mounting material included.

€12.03 €15.13

-€7.74

SW-MOTECH Universal Electric Kit — 12V 1A, Black

Universal cockpit power supply with cigarette lighter and USB outlets. Mounts to handlebar or fairing; includes mounting plates, screws and fuse.

€30.08 €37.82

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

-€36.11
Out of Stock

PINGEL Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

Clipped tether cord extends to 50"; optional adjustable wristband; water-resistant internal components; made in the USA.

€140.40 €176.51

-€121.30
Out of Stock

TERRY COMPONENTS Starter Motor — 12V, Chrome

Durable Nippondenso construction with precision components and dyno-tested reliability.
Upgraded solenoid and clutch components for extended service life.

€471.75 €593.05

-€118.35
Out of Stock

TERRY COMPONENTS Starter Motor — 12V, 1.5 kW, Black

Upgraded Nippondenso assembly with reinforced internal components, CNC-machined mounting noses and full dyno testing; made in the USA.

€460.24 €578.59

-€34.91
Out of Stock

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.4 kW, Chrome

Replacement solenoid end cover with integrated starter button. Installs in minutes with OEM hardware. Made in the USA.

€135.74 €170.65

Electrical & Ignition

Contact us

Products

Our company