Electrical & Ignition

-€82.94

THUNDERMAX Twin Cam Stand-Alone Ignition System — Black

Complete stand-alone ignition for Twin Cam motors. Programmable timing and rev-limit, single-fire high-output operation, and real-time diagnostics. Compact billet-aluminum housing; mounts with 1/4"-20 bolts, 2" apart.

€322.55 €405.49

-€48.44

ACCEL 12 V Power Pulse Coil — 4.2 Ω, Black

Offers higher voltage, faster rise time and longer spark duration. Vibration- and heat-resistant construction for increased durability.

€141.02 €189.46

-€47.59

JIMS Coil Relocation Kit — JIMS 5480

Relocates the coil below the neck between the frame down tubes; includes mounting hardware and extended spark plug wires; made in the USA.

€185.07 €232.66

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€118.35

TERRY COMPONENTS Starter Motor — 12V, 1.5 kW, Black

Upgraded Nippondenso assembly with reinforced internal components, CNC-machined mounting noses and full dyno testing; made in the USA.

€460.24 €578.59

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

-€9.44

THUNDERMAX Push-Button Converter — Handlebar switch, 1 A, black

Converts a momentary push-button signal to a latching output. Circuit-protected, no relays. Compact 2" x 0.6" x 0.5". Six-wire hookup; wiring diagram included. For 12 V systems, 1 A max.

€36.72 €46.16

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€36.46

ACCEL Unmolded Alternator Stator — 22A, 12V

Individually wrapped and boxed in four-color display packaging. Unmolded design for rebuilds and repairs.

€141.84 €178.30

-€7.36

PINGEL Tether Cord with Wristband — Black

Secure tether cord with adjustable wristband for keys and small tools. Made in the USA.

€28.63 €35.99

Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

-€36.11

PINGEL Tether Kill Switch — 32 mm (1-1/4"), Black, Orange, Silver

Clipped tether cord extends to 50"; optional adjustable wristband; water-resistant internal components; made in the USA.

€140.40 €176.51

-€121.30

TERRY COMPONENTS Starter Motor — 12V, Chrome

Durable Nippondenso construction with precision components and dyno-tested reliability.
Upgraded solenoid and clutch components for extended service life.

€471.75 €593.05

-€34.91

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.4 kW, Chrome

Replacement solenoid end cover with integrated starter button. Installs in minutes with OEM hardware. Made in the USA.

€135.74 €170.65

-€111.44

TERRY COMPONENTS Starter Motor — 12V, 1.2 kW, Chrome

Nippondenso starter assembled in the U.S.A.; heavy-duty components, precision clutch parts, and dyno-tested for reliable performance.

€433.38 €544.82

-€36.14
Out of Stock

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.8 kW, Chrome

Replaces the original end cover and installs in minutes with factory hardware.

€140.58 €176.72

Electrical & Ignition

Contact us

Products

Our company