+34 636 847 491 (10:00 - 13:30)
Electrical & Ignition

Active filters
KURYAKYN
Total Control Passing Lamp Harness — 12 V
Keeps passing lamps lit with the high beam; required for Phase 6/Phase 7 LED setups. Plug-and-play installation.
€28.25
Regular price
€35.51
KURYAKYN
Aluminum Load Equalizers — 12V, Pair, Black anodized
Replaces OEM incandescent turn signals with low-draw LEDs; includes heat-shrink butt connectors and a heat-dissipating extruded housing. 100W — 6Ω rating. In most cases allows all four signals to be upgraded.
€12.74
Regular price
€16.01
KURYAKYN
Spark Plug Head Bolt Cover — Chrome, Silver
Stepped and slotted design complements the engine; faceted edges reflect light. Easy to install for a clean, finished look.
€70.78
Regular price
€88.99
DAYTONA
CNC 2-Button Switch — DAYTONA Switch, P/N 80918
Compact CNC-aluminum 2-button momentary switch for 22.2 & 25.4 mm handlebars. 12 mm wide, max 50 mA. Wiring can be routed inside or outside the handlebar. Operates VELONA gauges remotely.
€44.66
Regular price
€60.46
DAYTONA
CNC 2-Button Switch for Velona — Width 12mm, 22.2/25.4mm...
CNC aluminum 2-button momentary switch for remote control of VELONA gauges; fits 22.2 and 25.4mm handlebars.
€46.52
Regular price
€62.98
KURYAKYN
Mach 2™ Horn Cover — Chrome, Black
Perfect complement to the Mach 2™ air cleaner; replaces the stock "cowbell" horn cover for a cleaner look.
€93.36
Regular price
€117.37
FLOSSER
Horns and Fanfares — 70 mm, 12V
Street-legal horns and fanfares with a galvanized finish. Easy to install and fit virtually all bikes.
€6.53
Regular price
€8.85
FLOSSER
Horns and Fanfares — 70 mm (2-3/4") disk horn, 12V
Street-legal, easy-to-install galvanized horns and fanfares that fit most motorcycles.
€6.53
Regular price
€8.85
FLOSSER
Horns and Fanfares — 91 mm, 12V
Street-legal, easy-to-install galvanized horns and fanfares that fit most bikes.
€7.10
Regular price
€9.62
FLOSSER
Horns and Fanfares — 91 mm, High Tone, 12V
Street-legal, easy-to-install galvanized horns and fanfares that fit virtually all bikes.
€7.10
Regular price
€9.62
FLOSSER
Horns and Fanfares — 91 mm (3-9/16"), 12V
Street-legal horns and fanfares; easy to install and fit virtually all bikes, with a galvanized finish.
€13.32
Regular price
€17.87
FLOSSER
Horns and Fanfares — 12V
Street-legal horns and fanfares; easy to install and galvanized for a long-lasting finish.
€12.39
Regular price
€16.93
FLOSSER
Horns and Fanfares — 12V, Black
Street-legal horns and fanfares; easy to install; galvanized for a timeless finish.
€27.60
Regular price
€37.37
FLOSSER
Horns and Fanfares — 12V, Chrome
Street-legal horns and fanfares that are easy to install and galvanized for a lasting finish.
€33.69
Regular price
€45.62
FLOSSER
Horns and Fanfares — 12V, Black
Street-legal, galvanized horns and fanfares that fit virtually all bikes—easy to install and built for lasting performance.
€30.14
Regular price
€40.80
KURYAKYN
Starter Solenoid Cover — Chrome
Protects the starter solenoid and related wiring; direct-fit with stock starter end cover.
€83.99
Regular price
€105.59
KURYAKYN
Regulator Cover — Chrome
Two-piece stamped cover fits the stock regulator; open, vented design; decorative fasteners; room inside for lights.
€67.56
Regular price
€84.93
BARNETT
Electronic Throttle Control Extension — 20 cm (8\"),...
Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.
€50.78
Regular price
€63.84
BARNETT
Electronic Throttle Control Extension — 12" cable
- Allows easy handlebar height changes on electronic throttle models.
- OEM-type connectors for plug-and-play installation.
- Made in the USA.
€50.95
Regular price
€64.06
KURYAKYN
Prism+ Light Wiring Connector — Y-Cable, Short
Relay loop connector that returns the signal to the Bluetooth controller for reliable light operation.
€14.83
Regular price
€18.64
DEI
Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black
Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).
€10.45
Regular price
€15.21
DEI
Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black
Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.
€64.01
Regular price
€93.11
DEI
Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black
Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.
€70.38
Regular price
€102.40
DEI
Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black
Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.
€93.38
Regular price
€135.85
DEI
Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')
Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.
€137.51
Regular price
€200.05
DEI
Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black
Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.
€44.38
Regular price
€64.59
DEI
Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black
Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.
€58.40
Regular price
€84.97
FLOSSER
Relay Socket — 6.3 mm pin
Secure terminal interface for common relays. Sold individually or in packs of 10.
€0.76
Regular price
€1.03
FLOSSER
Glass Wedge Bulb Socket — W2.1 x 9.5D
Premium replacement socket for glass wedge bulbs. Sold each.
€0.69
Regular price
€1.03
FLOSSER
Glass Wedge Bulb Socket — W2.1 x 9.5D
Premium quality socket for glass wedge bulbs. Ideal replacement for broken sockets. Sold each.
€2.22
Regular price
€3.27