Electrical & Ignition

Mo-Can Data Bus Adapter — 38 mm × 19 mm × 13 mm

-€7.56

MOTOGADGET Mo-Can Data Bus Adapter — 38 mm × 19 mm × 13 mm

Digital data bus adapter that reads vehicle speed, engine speed and MIL from the vehicle data bus by H-D. No extra sensors required. Vibration and weather resistant. Electronics protected against voltage peaks. Complies with SAE. 38 mm × 19 mm × 13 mm; approx. 36 g.

€75.68 €83.24

-€14.72

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€55.31 €70.03

-€14.72

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€55.31 €70.03

Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome

-€14.72

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome

High-voltage braided spark plug wires with FEP insulation, Posi-lock terminals and OE direct fit. Made in USA.

€55.31 €70.03

-€14.72

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€55.31 €70.03

Ignition Sensor Assembly — Harley Davidson®, Black/Gray

-€12.09

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — Harley Davidson®, Black/Gray

Includes pickup, mounting plate and wires with connectors for straightforward installation.

€47.02 €59.11

-€12.09

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — Harley Davidson®, Black, Gray

Includes pickup, mounting plate and wires with connectors.

€47.02 €59.11

-€12.09

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — For Harley-Davidson, Black, Gray

Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.

€47.02 €59.11

-€5.94

PAUGHCO Distributor Hold Down — Chrome

Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.

€23.09 €29.03

-€19.27

DRAG SPECIALTIES Ignition Sensor Assembly — Black, Gray

Replacement ignition sensor assembly. Includes pickup, mounting plate and pre-wired connectors.

€54.45 €73.72

-€19.27

DRAG SPECIALTIES Ignition Sensor Assembly — Black, Gray

Includes pickup, mounting plate and wires with connectors for straightforward installation.

€54.45 €73.72

Auto-Canceling Turn Signal Module — 2-7/8" L x 1-3/8" W x 7/8" D, 12V, 6 pins, Black

-€17.81

BADLANDS Auto-Canceling Turn Signal Module — 2-7/8" L x 1-3/8" W x 7/8"...

Plug-in auto-canceling turn signal module with LED load equalizer and emergency flasher. Verify your bike’s connector before purchase.

€69.26 €87.07

-€14.58

BADLANDS Turn Signal Load Equalizer™ III — 12V, hard-wire, waterproof

Solid-state waterproof load equalizer designed to eliminate erratic turn-signal blinking and to work with OEM alarm or turn-signal modules (TSSM/TSM). Compatible with most halogen and LED custom signals. Made in the USA.

€56.68 €71.26

-€10.21

DRAG SPECIALTIES Round Key Internal Contact Switch — Chrome

Metal housing with bright mirrored finish, printed circuitry contacts, six-lug terminals, includes two spare keys.

€28.84 €39.05

-€2.19

DRAG SPECIALTIES Circuit Breaker — 40 A, threaded connector

Replacement circuit breaker offering reliable protection and easy installation for maintenance or repairs.

€6.18 €8.37

-€3.48

DRAG SPECIALTIES Micro Relay with Diode — 12V, Black

Direct OEM replacement. Compact micro relay with integrated diode for reliable switching.

€9.84 €13.32

-€1.23

DRAG SPECIALTIES Generator Drive Gear Bearing — 6202-2RS, Blue/Chrome

Direct-fit replacement component; meets or exceeds OEM specifications. Durable construction for extended service life.

€3.45 €4.68

-€143.19

DAYTONA TWIN TEC LLC External Ignition Conversion Kit — Black

Replaces heat-sensitive internal nose-cone ignitions with an external 1007EX module; includes harness, sensors, hardware, and instructions.

€556.88 €700.07

-€17.31

DRAG SPECIALTIES Crank Position Sensor — Black

High-quality replacement sensor for accurate crankshaft position detection.

€48.91 €66.22

-€1.41

DRAG SPECIALTIES Starter Shaft Thrust Washers — 2-pack

Precision thrust components for reliable axial support. Direct OEM replacement for correct fit and performance.

€3.99 €5.40

-€9.33

K&S TECHNOLOGIES Hydraulic Brake Light Switch — 10 mm (3/8"), M10 x 1.25, Chrome

Dependable hydraulic brake light switch with 19" long wires and terminals. Includes two washers; compact and easy to install.

€26.39 €35.72

-€9.33

K&S TECHNOLOGIES Hydraulic Brake Light Switch — M10 x 1.0, 10 mm (3/8"), Chrome

Reliable hydraulic brake-light activation with 19" wires and terminals. Includes two washers for installation.

€26.39 €35.72

Hydraulic Brake Light Switch — 9.5 mm (3/8"), 3/8-24 thread, Chrome

-€8.27

K&S TECHNOLOGIES Hydraulic Brake Light Switch — 9.5 mm (3/8"), 3/8-24 thread,...

Activates brake light with hydraulic pressure. Includes two washers and 19" long wires with terminals. Compact design.

€23.38 €31.65

Hydraulic Brake Light Switch — 11.1 mm (7/16"), 7/16-24, Chrome

-€8.27

K&S TECHNOLOGIES Hydraulic Brake Light Switch — 11.1 mm (7/16"), 7/16-24, Chrome

Hydraulic brake light switch with chrome finish, 19" long wires and two washers for easy installation.

€23.38 €31.65

Mo-Relay — 19 mm diameter, 19 mm height, 12V

-€2.21

MOTOGADGET Mo-Relay — 19 mm diameter, 19 mm height, 12V

Small, waterproof relay that routes high current to devices, reduces voltage drop and simplifies switch wiring. CNC-machined and easy to install.

€22.16 €24.37

Mo-Stop Digital Brake Light Modulator — MOTOGADGET mo-STOP, P/N 4000020

-€3.75

MOTOGADGET Mo-Stop Digital Brake Light Modulator — MOTOGADGET mo-STOP,...

Adjustable digital brake light controller — six selectable modes.
Also works as a standard flasher relay or with automatic switch-off.
Compatible with most LED and conventional brake lights.
Watertight, vibration-resistant and overload protected; easy installation.

€37.43 €41.18

$Dual Signal Converter for Plasma Rods — 20 cm (8\"), Black$

-€1.60

CUSTOM DYNAMICS Dual Signal Converter for Plasma Rods — 20 cm (8\"), Black

Converts two-wire signals to three-wire for running-brake applications to ensure correct running/brake light operation.

€4.55 €6.15

Out of Stock

KURYAKYN 8-Pin Hardwire Adapter

Essential 8-pin connector for installing Panacea taillights or Küryakyn Run-Turn-Brake controller.

€12.24

-€45.80

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts stock or custom signals to running and brake lights while retaining turn function; built-in load equalizer; plug-in connectors; made in the USA.

€95.63 €141.43

Run, Brake and Turn Signal Module — 12V, 6-pin OEM-style connector

-€45.80

BADLANDS Run, Brake and Turn Signal Module — 12V, 6-pin OEM-style...

Converts stock or custom turn signals into running and brake lights while preserving turn-signal operation; built-in load equalizer and plug-in connectors for easy installation on select models.

€95.63 €141.43

Electrical & Ignition

Contact us

Products

Our company