Electrical & Ignition (7)

-€1.42
Out of Stock

CUSTOM DYNAMICS ProGLOW™ End Caps — Black, 7-pack

Seven-piece set with three loop caps to terminate wiring channels and four dummy caps for waterproofing; compatible with most low-profile LED strips (sold separately).

€5.51 €6.93

TriBar Eliminator Harness — 20 cm (8") wire, fits Harley-Davidson®

-€6.88
Out of Stock

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8") wire, fits...

Plug-and-play pass-through harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.73 €33.61

$Throttle-By-Wire Extension Kit — 38 cm (15\"), Black$

-€7.12
Out of Stock

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 38 cm (15\"), Black

Pre-cut, color-matched, plug-and-play wiring to extend OEM throttle connections with Molex terminals.

€27.74 €34.86

Throttle-By-Wire Extension Kit — 20 cm (8") wire, Harley-Davidson, Black

-€7.12
Out of Stock

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 20 cm (8") wire,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play extension of OEM throttle-by-wire wiring.

€27.74 €34.86

Handlebar Extension Wire Kit — 15" (38 cm), Harley-Davidson, Black

-€11.37
Out of Stock

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 15" (38 cm), Harley-Davidson,...

Pre-cut, color-matched wiring with Molex terminals for plug-and-play extension of original equipment (OEM) handlebar wires.

€44.22 €55.59

Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson, Black

-€7.54
Out of Stock

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extension installs.

€29.33 €36.87

Handlebar Extension Wire Kit — 12" (30.5 cm), Black, Harley Davidson®

-€9.09
Out of Stock

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 12" (30.5 cm), Black, Harley...

Pre-cut wiring with Molex terminals on each end for plug-and-play extension of OEM handlebar wiring.

€35.38 €44.47

-€9.54
Out of Stock

CUSTOM DYNAMICS Light Bar Harness — for Harley-Davidson

Compact plug-and-play harness that supplies direct battery power with built-in protections.

Terminal connectors for direct battery hookup
On/off switch
Short circuit and terminal overload protection
No draw from run/aux circuits

€37.10 €46.64

Front Turn Signal Extension Harness — 4" wire length, JAE connector, Black

-€4.77
Out of Stock

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 4" wire length, JAE...

Extends OEM front turn signal wiring for easy relocation of housings; plug-and-play connectors and color-matched wiring.

€18.57 €23.34

Front Turn Signal Extension Harness — 20 cm (8"), JAE connector, Harley-Davidson

-€4.77
Out of Stock

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 20 cm (8"), JAE...

Allows relocation of OEM front turn signal housings by extending the factory wiring for clean, plug-and-play installs.

€18.57 €23.34

Front Turn Signal Extension Harness — 30.5 cm (12") wire, pair, Black

-€4.77
Out of Stock

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 30.5 cm (12") wire,...

Plug-and-play extension harness lets you relocate front OEM turn signal housings when upgrading handlebars; installs in-line for left and right connections.

€18.57 €23.34

Front Turn Signal Extension Harness — 15" (38 cm), Pair, JAE connector, Black

-€4.77
Out of Stock

CUSTOM DYNAMICS Front Turn Signal Extension Harness — 15" (38 cm), Pair, JAE...

Extends factory front turn signal wiring to allow relocation when upgrading handlebars. Plug-and-play inline harness with color-matched wires for easy installation.

€18.57 €23.34

Wire Harness — fits 2014–2023 Harley Davidson Touring (2013 or earlier CVO rear fender conversion)

-€11.47
Out of Stock

CUSTOM DYNAMICS Wire Harness — fits 2014–2023 Harley Davidson Touring (2013 or...

Provides a plug-and-play connection for Custom Dynamics ProBEAM CVO Taillights on Harley Davidson Touring conversions.

€44.59 €56.06

-€10.19
Out of Stock

CUSTOM DYNAMICS Rear Fender Adapter — 6-pin Molex, Black, fits Harley Davidson®

Plug-and-play adapter that connects to the OEM wiring harness under the seat.

Works with the OEM rear wiring harness for easier rear fender or custom lighting installs.

Color-coded wires and pre-terminated connectors for quick hookup.

Compatible with Custom Dynamics ProBEAM® harnesses (2050-0393, 2120-1246) — sold separately.

€39.61 €49.80

-€5.54
Out of Stock

CUSTOM DYNAMICS Run/Turn Signal Adapter — JAE connector, Fits Harley-Davidson®

Provides run and turn power access with left/right pigtails for plug-and-play lighting installations.

€21.56 €27.10

Run/Turn Signal Adapter — For Harley‑Davidson®, JAE connector, MPR-ST-FTS

-€5.54
Out of Stock

CUSTOM DYNAMICS Run/Turn Signal Adapter — For Harley‑Davidson®, JAE connector,...

Connects to OEM wiring for run power, turn signal power, and ground; pigtails for left and right side connections; simple plug-in installation.

€21.56 €27.10

-€7.68
Out of Stock

CUSTOM DYNAMICS Run/Turn Signal Adapter — JAE connector, fits Harley Davidson®

Wires into the OEM harness to provide run, turn, and ground connections. Includes pigtails for left and right side; supports plug-and-play lighting (sold separately).

€29.88 €37.56

Shark Demon® Dual Lamp Wiring Harness — Y-splitter, Black, Harley-Davidson®

-€4.55
Out of Stock

CUSTOM DYNAMICS Shark Demon® Dual Lamp Wiring Harness — Y-splitter, Black,...

Adapter y-harness mates to a pair of Shark Demon® LED headlights and enables plug-and-play installation to the OEM FLTR headlight connector.

€17.68 €22.23

Throttle-By-Wire Extension Harness — 122 cm (4') cable, for Harley-Davidson

-€6.82
Out of Stock

CUSTOM DYNAMICS Throttle-By-Wire Extension Harness — 122 cm (4') cable, for...

Provides extra length for taller handlebars. JST connectors route through most bars to avoid splicing. Plug-and-play installation.

€26.56 €33.38

Throttle-By-Wire Extension Harness — 20 cm (8"), 24 AWG, Harley-Davidson®

-€6.82
Out of Stock

CUSTOM DYNAMICS Throttle-By-Wire Extension Harness — 20 cm (8"), 24 AWG,...

Extension harness for throttle-by-wire systems with JST connectors for plug-and-play installation, eliminates splicing.

€26.56 €33.38

Speedometer and Instrument Extension Harness — 91 cm (36") , 24 AWG

-€6.82
Out of Stock

CUSTOM DYNAMICS Speedometer and Instrument Extension Harness — 91 cm (36") ,...

36" extension harness with JST connectors for plug-and-play installation.

€26.56 €33.38

-€7.18
Out of Stock

CUSTOM DYNAMICS Accessory Harness — Splitter, for Harley-Davidson®

Splitter harness adds two accessory connections for easy plug-and-play installation.

€27.92 €35.10

Tour Pak® Quick Disconnect Harness — Harley Davidson®

-€6.18
Out of Stock

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — Harley Davidson®

Plug-and-play connector for simple attachment and removal of the Tour Pak®.

€24.02 €30.20

-€9.92
Out of Stock

CUSTOM DYNAMICS Integrated Taillight Harness — Harley Davidson® fit, black

Provides turn signal power to rear taillight assembly. Plug-and-play installation.

€38.64 €48.56

-€5.68
Out of Stock

CUSTOM DYNAMICS 4-Wire Weather-Tight Quick Disconnects — 4 pins, 22 AWG, Black

Weather-tight quick disconnects for auxiliary lighting; installs inline for easy removal of saddlebags and other components.

€22.14 €27.82

-€111.44
Out of Stock

TERRY COMPONENTS Starter Motor — 12V, 1.4 kW

Rebuilt Nippondenso starter with upgraded internal components for extended service life.

Dyno tested and assembled in the U.S.A.

€433.38 €544.82

-€111.44
Out of Stock

TERRY COMPONENTS Starter Motor — 12V, 1.4 kW, Chrome

Heavy-duty Nippondenso starter assembled in the USA and dyno-tested for reliable starting performance.

€433.38 €544.82

-€106.30
Out of Stock

TERRY COMPONENTS Starter Motor — 12V, 1.4 kW, Black

Nippondenso starter assembled in the United States with heavy-duty components and precision testing for dependable starts.

€413.38 €519.68

-€272.68
Out of Stock

TERRY COMPONENTS 2.0 kW Starter Motor — 12V, Chrome

Heavy-duty starter with reinforced internals, precision-ground clutch components, CNC billet mounting noses and complete dyno testing. Made in the USA.

€770.60 €1,043.28

-€162.76
Out of Stock

TERRY COMPONENTS 2.0 kW Starter Motor — 12V, Black wrinkle

Heavy-duty starter with reinforced solenoid and clutch components, precision-ground parts, CNC billet mounting, and dyno testing for reliable high-torque starts.

€632.91 €795.67

Contact us

Products

Our company