Electrical & Ignition (4)

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

Superior connection compared to crimping. Wire ends lock between opposing cone shapes when hand tightened.

€9.86 €12.67

Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

Provides a superior alternative to crimping; locks wire ends between opposing cones when hand tightened for a secure mechanical connection.

€9.86 €12.67

-€2.19

CUSTOM DYNAMICS Wiring Cage Clamp — 3-pin, 20 A

Compact spring-clip connector for joining multiple wires; accepts up to five 24 AWG wires per port.

€6.70 €8.89

-€2.64

CUSTOM DYNAMICS Mini ATC Fuse Holder — 3 A, 5-pack, Black, Red

Waterproof-boot mini fuse kit with five holders and pre-installed 3 amp fuses.

€9.26 €11.90

-€4.85

CUSTOM DYNAMICS TruBEAM® Headlamp Adapter Harness — Fits H4

Required when replacing stock dual-halogen headlamps with an LED headlamp or any other H4-based headlamp. Provides plug-and-play connection.

€17.02 €21.87

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — Harley-Davidson®

Direct plug-in adapter for rear fender swaps; connects to the OEM under-seat and rear lighting harnesses for plug-and-play installation.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — for Harley-Davidson®

Plugs into the OEM harness under the seat and mates with the OEM rear lighting harness for plug-and-play swaps. No splicing required.

€32.80 €41.24

SMART Controller Brake Y-Harness — For Harley Davidson®, Black

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — For Harley Davidson®, Black

Plug-and-play Y-harness that feeds brake signal to 3-wire (red non-sequential) lighting products for use with the Smart Turn Signal Controller and 1157 dual-color rear signals.

€26.55 €33.37

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 30.5 cm (12"), Black

Pre-cut lengths for easy extension of OEM throttle wires; color-matched Molex-terminated wiring; plug-and-play installation.

€27.74 €34.86

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 4" wire length, Harley Davidson®

Pre-cut, color-matched Molex-terminated leads for quick plug-and-play extension of OEM throttle-by-wire wiring during handlebar installs.

€27.74 €34.86

-€4.11

CUSTOM DYNAMICS Shark Demon® Single Lamp Wire Harness — SD2-UNV-HARN

Wire harness that connects the Shark Demon® headlight to vehicle high beam, low beam, and ground.

€15.99 €20.10

Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

-€6.68

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

Plug-and-play harness for easy Tour Pak® removal and reconnection.

€25.95 €32.63

-€2.03

CUSTOM DYNAMICS Run/Brake Taillight Adapter — For Harley-Davidson

Plug-and-play adapter for run and brake LED taillights. Compatible with Custom Dynamics and ProBEAM models (sold separately). Not compatible with integrated turn-signal taillights.

€7.86 €9.89

-€7.25

CUSTOM DYNAMICS Integrated Taillight Adapter — Harley Davidson®, TL-LRST-INT

Adapter for integrated LED taillights; provides running light, brake light and amber auxiliary turn signals. Plug-and-play installation.

€28.22 €35.47

High-Output Ignition Coil — 12V, 45,000V, Black

-€29.19

DAYTONA TWIN TEC LLC High-Output Ignition Coil — 12V, 45,000V, Black

High-output ignition coil that delivers stronger, more consistent spark for improved throttle response and reliability.

€113.51 €142.70

-€7.11

DAYTONA TWIN TEC LLC Universal Spark Plug Wire Kit — 36" wire length

Complete kit with plug wires, terminals and boots for many applications. Made in the U.S.A.

€27.65 €34.76

-€8.88

DAYTONA TWIN TEC LLC Universal Spark Plug Wire Kit — 24 in (61 cm), Black

Complete kit with plug wires, terminals and boots for many applications; made in the U.S.A.

€34.56 €43.44

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin connector, Black

Converts stock and custom signals into running and brake lights while maintaining turn signal function. Built-in load equalizer and plug-in connectors for easy installation.

€112.50 €141.43

Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x 7/8", Deutsch 8-pin

-€22.55

BADLANDS Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x...

Direct plug-in replacement; self-cancels after 11 seconds, manual cancel available. Built-in emergency flasher and LED load equalizer up to 100 W per side. Verify your bike's connector before purchase.

€87.69 €110.24

Contact us

Products

Our company