Electrical & Ignition (3)

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

Superior connection compared to crimping. Wire ends lock between opposing cone shapes when hand tightened.

€9.86 €12.67

Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

Provides a superior alternative to crimping; locks wire ends between opposing cones when hand tightened for a secure mechanical connection.

€9.86 €12.67

-€2.19

CUSTOM DYNAMICS Wiring Cage Clamp — 3-pin, 20 A

Compact spring-clip connector for joining multiple wires; accepts up to five 24 AWG wires per port.

€6.70 €8.89

-€2.64

CUSTOM DYNAMICS Mini ATC Fuse Holder — 3 A, 5-pack, Black, Red

Waterproof-boot mini fuse kit with five holders and pre-installed 3 amp fuses.

€9.26 €11.90

-€4.85

CUSTOM DYNAMICS TruBEAM® Headlamp Adapter Harness — Fits H4

Required when replacing stock dual-halogen headlamps with an LED headlamp or any other H4-based headlamp. Provides plug-and-play connection.

€17.02 €21.87

-€4.91

MOTOGADGET Mo-Unit Cable Kit — mo-UNIT, MOTOGADGET, 4002031

Top-grade copper-strand cable kit with varied diameters and colors, includes cable ties and end sleeves — approx. 1 kg of materials.

€45.11 €50.02

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

-€6.71

CUSTOM DYNAMICS TriBar Eliminator Harness — 20 cm (8 in), for Harley-Davidson®

Plug-and-play harness that removes the factory lower TriBar shell and powers the rear OEM turn signal bar.

€26.08 €32.79

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — Harley-Davidson®

Direct plug-in adapter for rear fender swaps; connects to the OEM under-seat and rear lighting harnesses for plug-and-play installation.

€32.80 €41.24

-€8.44

CUSTOM DYNAMICS Rear Fender Adapter — for Harley-Davidson®

Plugs into the OEM harness under the seat and mates with the OEM rear lighting harness for plug-and-play swaps. No splicing required.

€32.80 €41.24

SMART Controller Brake Y-Harness — Black, fits Harley-Davidson®

-€6.82

CUSTOM DYNAMICS SMART Controller Brake Y-Harness — Black, fits Harley-Davidson®

Routes brake signal to 3-wire lighting products so a Magic Strobes™ Brake Light Flasher can provide flash/strobe patterns; works with SMART Turn Signal Controller and Dual Color 1157 rear signals. Plug and play.

€26.55 €33.37

$Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson, Black$

-€7.77

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 20 cm (8\"), Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extensions.

€30.19 €37.96

Throttle-By-Wire Extension Kit — 12" (30.5 cm) wire length, Black, fits Harley-Davidson®

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 12" (30.5 cm) wire length,...

Pre-cut, plug-and-play wiring to extend OEM throttle-by-wire harnesses; color-matched with Molex terminals.

€27.74 €34.86

Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson, Black

-€7.54

CUSTOM DYNAMICS Handlebar Extension Wire Kit — 10.2 mm (4") , Harley-Davidson,...

Pre-cut, color-matched wires with Molex terminals for plug-and-play handlebar extension installs.

€29.33 €36.87

$Throttle-By-Wire Extension Kit — 10.2 mm (4\"), Black$

-€7.12

CUSTOM DYNAMICS Throttle-By-Wire Extension Kit — 10.2 mm (4\"), Black

Pre-cut, color-matched wires with Molex terminals for plug-and-play extension of throttle-by-wire harnesses.

€27.74 €34.86

-€4.11

CUSTOM DYNAMICS Shark Demon® Single Lamp Wire Harness — SD2-UNV-HARN

Wire harness that connects the Shark Demon® headlight to vehicle high beam, low beam, and ground.

€15.99 €20.10

Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

-€6.68

CUSTOM DYNAMICS Tour Pak® Quick Disconnect Harness — For Harley-Davidson®

Plug-and-play harness for easy Tour Pak® removal and reconnection.

€25.95 €32.63

-€2.03

CUSTOM DYNAMICS Run/Brake Taillight Adapter — For Harley-Davidson

Plug-and-play adapter for run and brake LED taillights. Compatible with Custom Dynamics and ProBEAM models (sold separately). Not compatible with integrated turn-signal taillights.

€7.86 €9.89

-€7.25

CUSTOM DYNAMICS Integrated Taillight Adapter — Harley Davidson®, TL-LRST-INT

Adapter for integrated LED taillights; provides running light, brake light and amber auxiliary turn signals. Plug-and-play installation.

€28.22 €35.47

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

Copper Plus™ Spark Plug — 14 mm thread, 9.5 mm reach (3/8"), heat range 12

-€3.24

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 9.5 mm reach (3/8"),...

Copper Plus™ spark plug with a copper-core center electrode and Ultraseal™ coating for improved ignition and corrosion resistance.

€2.91 €6.15

Copper Plus™ Spark Plug — 14 mm thread, 11.1 mm reach (7/16"), 17.5 mm hex (11/16"), heat range 8

-€3.13

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 11.1 mm reach (7/16"),...

Copper Plus™ spark plug with copper-core electrode, SAC-9 resistor and Ultraseal™ coated shell; made in the USA.

€2.80 €5.93

Copper Plus™ Spark Plug — 12.7 mm reach, 14 mm thread, Heat Range 82, RL82YC

-€2.79

CHAMPION Copper Plus™ Spark Plug — 12.7 mm reach, 14 mm thread, Heat...

Copper-core spark plug with SAC-9 resistor and Ultraseal™ coating; made in the USA.

€2.49 €5.28

-€2.50

Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, 20.6 mm...

Copper Plus™ spark plug: copper-core design for controlled heat range, SAC-9 resistor for EMI/RFI suppression, Ultraseal™ coating for rust prevention. Made in the USA.

€2.24 €4.74

Contact us

Products

Our company