Electrical & Ignition (2)

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10, 16–14, 22–18, 26–24 AWG, assorted colors

-€8.46

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10,...

No soldering gun required; low-heat solder activates with a heat gun to create a watertight shrink seal. Packs come in a clear jar with barcode-labeled packs for easy counter or service use.

€23.84 €32.30

Solderless Wire Connectors — 20-pack, White

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, White

Solderless splices using low-heat solder that melts with a heat gun and creates a watertight shrink-tube seal.

€22.26 €41.85

-€1.23

K&S TECHNOLOGIES Solderless Wire Connectors — White

Sealed solderless splices that melt with a heat gun for fast, watertight electrical connections. No soldering gun required.

€1.18 €2.41

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin connector, Black

Converts stock and custom signals into running and brake lights while maintaining turn signal function. Built-in load equalizer and plug-in connectors for easy installation.

€112.50 €141.43

Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x 7/8", Deutsch 8-pin

-€22.55

BADLANDS Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x...

Direct plug-in replacement; self-cancels after 11 seconds, manual cancel available. Built-in emergency flasher and LED load equalizer up to 100 W per side. Verify your bike's connector before purchase.

€87.69 €110.24

-€9.25

BADLANDS Turn Signal Load Equalizer™ II — 12 V

Restores correct amperage when aftermarket marker lights replace stock turn signals. Maintains emergency flasher function. Made in the USA. Not for parade use or extended idling.

€35.98 €45.23

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€24.30

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts turn signals into running and brake lights while keeping turn signal function; built-in load equalizer and easy instructions for straightforward installation.

€94.49 €118.79

-€7.63

BADLANDS Turn Signal Load Equalizer™ — 12 V

Restores amperage draw for aftermarket marker lights so self-canceling systems function properly. Made in the USA.

€29.67 €37.30

-€2.16

K&S TECHNOLOGIES 12V Economy Horn — 12V, 69.9 mm, Black

Compact electric horn that adds style and safety and mounts almost anywhere.

€6.10 €8.26

-€2.14

K&S TECHNOLOGIES 12V Economy Horn — 69.9 mm (2-3/4"), Chrome

Add style and safety to your bike. Sized to mount almost anywhere.

€6.03 €8.17

Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10, 16-14, 22-18, 26-24 AWG

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12-10,...

Solderless heat-shrink connectors in a refill kit—low-heat solder core and shrink tubing for watertight seals; packaged for easy counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG, 100-pack, white

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 26–24 AWG,...

Solderless heat-shrink connectors that melt with a heat gun and form a watertight seal; refill packs are barcode-labeled for quick service-counter handling.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG, 100 Pack, Blue

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 16–14 AWG,...

No soldering gun required; low-heat solder and heat-shrink tubing form watertight connections. Clear wide-mouth jar and bar-coded packs for easy handling at counter or service.

€127.26 €187.95

Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10 AWG, Yellow

-€60.69

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit — 100 Pack, 12-10...

Refill pack of wire connectors in a wide-mouth clear jar; low-heat solder melts with a heat gun for a watertight seal. Individually labeled packs with bar codes for easy counter handling.

€127.26 €187.95

Solderless Wire Connectors — 20 Pack, Blue

-€19.59

K&S TECHNOLOGIES Solderless Wire Connectors — 20 Pack, Blue

Tool-free wire connectors that form watertight, low-heat splices when activated with a heat gun.

€18.01 €37.60

Contact us

Products

Our company