Electrical & Ignition (2)

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€28.93

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin connector, Black

Converts stock and custom signals into running and brake lights while maintaining turn signal function. Built-in load equalizer and plug-in connectors for easy installation.

€112.50 €141.43

Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x 7/8", Deutsch 8-pin

-€22.55

BADLANDS Auto-Canceling Turn Signal Module — 12V, 2-7/8" x 1-3/8" x...

Direct plug-in replacement; self-cancels after 11 seconds, manual cancel available. Built-in emergency flasher and LED load equalizer up to 100 W per side. Verify your bike's connector before purchase.

€87.69 €110.24

-€9.25

BADLANDS Turn Signal Load Equalizer™ II — 12 V

Restores correct amperage when aftermarket marker lights replace stock turn signals. Maintains emergency flasher function. Made in the USA. Not for parade use or extended idling.

€35.98 €45.23

-€38.92

DYNATEK 12 V Ignition Coil — Black

Industry-standard 12 V coil with 35,000 V spark energy; fits Dyna systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — Green, pair

Industry-standard ignition coil with 35,000 V spark energy, compatible with Dyna ignition systems. Not for Twin Cam applications.

€151.34 €190.26

-€38.92

DYNATEK 12 V Ignition Coil — 35,000 V, Green

Industry-standard high-energy spark; fits Dyna ignition systems; made in the USA; not for Twin Cam applications.

€151.34 €190.26

-€22.89

DYNATEK-HARLEY Dual Output HD Coil 3 Ohm — 12V, 3.0 ohm, Green

Industry-standard dual-output coil for Dyna ignition systems. Not for Twin Cam applications. Made in the U.S.A.

€89.00 €111.89

-€36.28

DYNATEK-HARLEY Twin Fire II Miniature 3 Ohm Coil — 3.0 ohm, 12V, Black

Compact, sealed ignition coil offering high-voltage output and peak gap current over 50 mA. Made in the U.S.A.

€141.13 €177.41

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€24.30

BADLANDS Run, Brake and Turn Signal Module — 12V, Black

Converts turn signals into running and brake lights while keeping turn signal function; built-in load equalizer and easy instructions for straightforward installation.

€94.49 €118.79

-€7.63

BADLANDS Turn Signal Load Equalizer™ — 12 V

Restores amperage draw for aftermarket marker lights so self-canceling systems function properly. Made in the USA.

€29.67 €37.30

Electronic Ignition System — Black, dual fire

-€27.46

DYNATEK-HARLEY Electronic Ignition System — Black, dual fire

Self-contained ignition system with Hall Effect sensors. Improves timing less than three degrees, extends plug life, and eliminates points and condensers. Easy to install; requires a 5 ohm aftermarket coil for use with Dyna S and is not recommended with OEM coils.

€106.82 €134.28

Contact us

Products

Our company