Body & Frame (51)

-€220.75
Out of Stock

SLYFOX Carbon Fiber Rear Fender — Black gloss

Lightweight, aerospace-grade bolt-on rear fender with vacuum-bagged, autoclave-cured construction. Requires custom taillight and license plate mounting.

€858.50 €1,079.25

Plug-and-Play Trailer Wiring Kit — Sub-Harness, 142 cm (56") , 4 Pin Flat

-€37.57
Out of Stock

KHROME WERKS Plug-and-Play Trailer Wiring Kit — Sub-Harness, 142 cm (56") ,...

Simple plug-and-play trailer wiring kit with 6-pin Molex isolator, 15A fuse/fuse holder and included connectors. Made in the U.S.A.

€146.10 €183.67

-€220.75
Out of Stock

SLYFOX Carbon Fiber Rear Fender — Black, Matte

Lightweight, vacuum-bagged carbon fiber fender with bolt-on design. Requires custom taillight and license plate mounting; professional fitment recommended.

€858.50 €1,079.25

-€183.75
Out of Stock

SLYFOX Carbon Fiber Front Fender — Black gloss

Prepreg carbon fiber front fender with vacuum-bagged, autoclave-cured layup. Hardware included; made in the USA.

€714.63 €898.38

-€19.42
Out of Stock

RIVCO PRODUCTS 4-Wire to 5-Wire Signal Decoder — HD007-50

Separates combined brake/turn CAN-bus signals so 5-wire trailer lights operate correctly. Inline installation; no vehicle wiring changes required. Restores independent brake, left turn, right turn, and running light circuits.

€54.91 €74.33

Carbon Fiber Front Fender — Black, Matte

-€188.35
Out of Stock

SLYFOX Carbon Fiber Front Fender — Black, Matte

Vacuum-bagged, autoclave-cured construction with aerospace-grade, military-spec quality. Hardware included; made in the USA.

€732.49 €920.84

Plug-and-Play Trailer Wiring Kit — 6-pin Molex connector, 122 cm (48") length, 4-wire

-€37.57
Out of Stock

KHROME WERKS Plug-and-Play Trailer Wiring Kit — 6-pin Molex connector, 122...

Complete plug-and-play trailer wiring kit with isolator, 15-amp fuse and connectors. Made in the U.S.A.

€146.10 €183.67

Carbon Fiber Rear Fender — Rear, Black gloss

-€241.91
Out of Stock

SLYFOX Carbon Fiber Rear Fender — Rear, Black gloss

Pre-preg 3K full twill construction; aerospace grade; vacuum bagged and autoclave cured. Bolt-on design; requires custom taillight and license plate mounting; made in the U.S.A.

€940.77 €1,182.68

-€247.95
Out of Stock

SLYFOX Carbon Fiber Rear Fender — Black, Matte

Lightweight pre-preg 3K twill carbon fiber rear fender. Bolt-on design; taillight and license plate mount required separately. Vacuum bagged and autoclave cured. Made in the U.S.A.

€964.30 €1,212.25

Fender Bib for Solo Seat — 26.67 cm (10-1/2") length, 16.5 cm (6-1/2") width, rear mount, black

-€12.49
Out of Stock

MUSTANG Fender Bib for Solo Seat — 26.67 cm (10-1/2") length, 16.5 cm...

Secures to stock mounts with hook-and-loop and screw attachment. Felt-backed to protect paint, braided edging for a finished look, made in the USA.

€42.45 €54.94

Plug-and-Play Trailer Wiring Kit — 4-Wire, 4-Pin flat, 122 cm (48")

-€31.51
Out of Stock

KHROME WERKS Plug-and-Play Trailer Wiring Kit — 4-Wire, 4-Pin flat, 122 cm...

Complete plug-and-play trailer wiring kit. Includes 6-pin Molex isolator, 15-amp fuse/fuse holder, two butt connectors and ring terminal. No converter needed. Made in the U.S.A.

€122.52 €154.03

-€28.68
Out of Stock

KIMPEX Swivel Jack — 907 kg (2000 lb), Double Wheel

6" swivel, lifts 14"–24", fits up to 3" x 5" tongue; mounting hardware included.

€81.05 €109.73

-€12.80
Out of Stock

MUSTANG Fender Bib for Solo Seat — 13" length, Black

Hook-and-loop and screw attachment uses stock fender mounts. Felt-backed, braided-edged expanded vinyl construction. Made in the USA.

€43.51 €56.31

$Trailer Hitch — 47.6 mm (1-7/8\"), chrome$

-€38.20
Out of Stock

RIVCO PRODUCTS Trailer Hitch — 47.6 mm (1-7/8\"), chrome

Durable plated construction. Includes tow ball and mounting hardware. Quick to install.

€148.57 €186.77

Fender Bib for Solo Seat — 36.8 cm (14-1/2"), 14.6 cm (5-3/4"), Black, Chrome

-€12.98
Out of Stock

MUSTANG Fender Bib for Solo Seat — 36.8 cm (14-1/2"), 14.6 cm...

Hook-and-loop and screw attachment uses stock fender mounts. Felt-backed to protect paint. Braided edging and premium construction. Made in the USA.

€44.15 €57.13

Enclosed Trailer Door Grip Glides — Black

-€30.36
Out of Stock

CALIBER Enclosed Trailer Door Grip Glides — Black

Cost-effective set of 32 grip glides that protect snowmobile skis and improve ATV tire traction. Covers ~24 linear feet. Made in the U.S.A.

€85.82 €116.18

-€9.91
Out of Stock

KURYAKYN Fender Tip Accent — Front, Chrome

Polished accent that enhances the Touring fender look. Quick adhesive installation. Not for use with existing fender trim.

€38.52 €48.43

LowPro Glides™ — 12" (30.5 cm), 16 Pack, Black

-€62.35
Out of Stock

CALIBER LowPro Glides™ — 12" (30.5 cm), 16 Pack, Black

Low-profile HDPE glides reduce friction, protect trailer decking, and include stainless Torx mounting hardware.

€242.45 €304.80

Fender Skin — 38 cm (15"), 14 cm (5.5"), Rear, Black

-€11.61
Out of Stock

DRAG SPECIALTIES SEATS Fender Skin — 38 cm (15"), 14 cm (5.5"), Rear, Black

Protective Fender Skin with leather‑perimeter centers and finished edge. Felt liner to guard paint. Includes washer, screw and hook‑and‑loop positioning strap. Fits most OEM and accessory seats; designed to match Drag Specialties solo seats. Made in the USA.

€32.78 €44.39

Fender Skin — 38 cm (15") x 14 cm (5-1/2"), rear, Black

-€11.98
Out of Stock

DRAG SPECIALTIES SEATS Fender Skin — 38 cm (15") x 14 cm (5-1/2"), rear, Black

Protective rear fender cover with felt liner, included hardware and hook-and-loop positioning. Designed to match Drag Specialties solo seats.

€33.88 €45.86

-€10.99
Out of Stock

DRAG SPECIALTIES SEATS Fender Skin — 12" x 5-1/2", Rear, Black

Protective fender cover with finished edge, felt liner, pre-drilled holes and included hardware for easy installation.

€31.06 €42.05

-€9.18
Out of Stock

SHOW CHROME Trailer Harness — Sub-Harness, 16-125, SHOW CHROME

Electronically isolated five‑wire trailer harness with gel-sealed splice connectors for reliable running, brake and turn signal connections.

€62.41 €71.59

-€8.26
Out of Stock

DRAG SPECIALTIES SEATS Fender Skin — 10" x 5-1/2", rear, black

Hugs the fender perfectly; felt liner protects paint; includes washer, screw and hook-and-loop fastener; designed to match Drag Specialties solo seats; made in USA.

€23.34 €31.60

Trailer Hitch for Tri-Glide — 1-7/8" tongue, 1-1/4" receiver, 11" height, Black, Chrome

-€83.36
Out of Stock

RIVCO PRODUCTS Trailer Hitch for Tri-Glide — 1-7/8" tongue, 1-1/4" receiver,...

Super-strong trailer mounting for Tri-Glide; bolts to the frame, 1-7/8" tongue, 1-1/4" receptacle, 11" height; includes hardware.

€324.19 €407.55

Fender Skin — Black, 25.5 cm x 14 cm (10 x 5-1/2 in), Rear

-€9.29
Out of Stock

DRAG SPECIALTIES SEATS Fender Skin — Black, 25.5 cm x 14 cm (10 x 5-1/2 in), Rear

Protective Fender Skin designed to match Drag Specialties solo seats. Felt liner protects paint; includes hardware for installation. Made in the USA.

€26.23 €35.52

Bunk Wrap — 51 mm (2") height, 4-pack, Black

-€3.71
Out of Stock

CALIBER Bunk Wrap — 51 mm (2") height, 4-pack, Black

Durable non-porous wrap that mounts over bare wood to replace ripped carpeted bunks on aluminum boats, pontoons, lifts, PWCs, and trailers. Not for use over carpet.

€10.44 €14.15

Bunk Wrap — 2 in H, 6 in W, 16 ft L, Black

-€25.31
Out of Stock

CALIBER Bunk Wrap — 2 in H, 6 in W, 16 ft L, Black

Durable, low-maintenance replacement for carpeted bunks on raw aluminum boats, pontoons and lifts. Not for gel-coat or painted hulls.

€71.53 €96.84

Bunk Wrap — Black, 51 mm (2 in) height, 15 cm (6 in) width, 4 Pack

-€4.71
Out of Stock

CALIBER Bunk Wrap — Black, 51 mm (2 in) height, 15 cm (6 in) width, 4...

Durable, carpet‑free bunk cover for raw aluminum boats, pontoons, lifts, and trailers; mounts over bare wood and includes end caps and stainless hardware.

€13.33 €18.04

-€25.31
Out of Stock

CALIBER Bunk Wrap — 2" H, 4" W, 24' L, Black

Durable cover for raw aluminum bunks and boat lifts. Mounts over bare wood with end caps and stainless hardware included. Not for carpet, gel-coat, fiberglass, or painted hulls.

€71.53 €96.84

Bunk Wrap — 7.3 m (24'), 15 cm (6") width, 51 mm (2") height, Black

-€32.07
Out of Stock

CALIBER Bunk Wrap — 7.3 m (24'), 15 cm (6") width, 51 mm (2") height,...

Durable, low-friction replacement for ripped carpeted bunks on raw aluminum boats, pontoons, lifts, and trailers. Mounts over bare wood, reduces electrolysis and wear on lines and bow eyes, and helps limit spread of invasive species. Not for use over carpet, gel‑coat, fiberglass, or painted aluminum hulls.

€90.60 €122.67

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company