TOOLS

-€2.73

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.76 €16.49

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

-€23.79

PSR Roll-On Wheel Chock — 16"–21" wheel fit, front mounting

Heavy-duty, sturdy design. Fits wheels 16"–21".

€111.05 €134.84

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€11.12

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€51.91 €63.03

-€2.36

SHOW CHROME Tiedown Loop — 18" (45.5 cm), pair, red

18" looped nylon extension straps keep metal tie-down ends away from your bike. Sold in a two pack.

€3.00 €5.36

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

-€12.72

PSR Econo Rear Stand — Adjustable 13.75–15 in, White powder-coated

Universal rear stand for swingarms with spools. Adjustable width 13.75"–15". Mild-steel construction. Optional non-spool hardware sold separately (sold in pairs).

€59.39 €72.11

-€3.08

SHOW CHROME Filter Wrench — 64 mm (2-1/2"), oil filter, silver

12-sided addition for fast access to 17 mm and 12 mm drain plugs.

Includes drain plug wrench. Made in USA.

€14.33 €17.41

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€19.13

PSR Deluxe Rear Wheel Stand — 5-1/2" (13.97 cm), Black, Rear

Rear stand with included spooled lifting hardware, tool-less adjusters, and large wheels for easy rolling.

€89.27 €108.40

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

-€9.94

PRESSOL Barrel Pump — Black, stainless steel, PRESSOL

Steel-pipe barrel pump for 60/200/220 l containers. Delivery 16 l/min. For oils up to SAE 90. Packed in single carton box.

€32.31 €42.25

Multi-Purpose Drain Pan — 6 L, 400 x 390 x 120 mm, Black

-€1.83

PRESSOL Multi-Purpose Drain Pan — 6 L, 400 x 390 x 120 mm, Black

6 L multi-purpose drain pan with inner scale, robust handles, stackable design and break-proof polyethylene construction.

€5.98 €7.81

-€4.60

PRESSOL Multi-Purpose Drain Tray — 7 l, 500 x 300 x 130 mm, Black

7 l multi-purpose drain tray for oil changes and parts cleaning; lock-up discharge spout, robust carrying handle, base 500 x 300 mm, height 130 mm, break-proof.

€14.93 €19.53

-€4.47

PRESSOL Industrial Sprayer Double Acting — 750 ml, red, black

Double-acting 750 ml industrial sprayer with adjustable atomizer head and flexible hose; ideal for thin liquids such as lubricants and cleaners.

€14.49 €18.96

-€1.18

PRESSOL Measuring Jug — 0.5 l, 1 l, 2 l, clear

Measuring jug in 0.5 l, 1 l and 2 l sizes; painted raised scale, ergonomic handle, chemical-resistant and stackable.

€3.84 €5.02

Measuring Jug — 0.5 L, 1 L, 2 L, Polypropylene, 245 mm height, 210 x 150 mm base

-€2.89

PRESSOL Measuring Jug — 0.5 L, 1 L, 2 L, Polypropylene, 245 mm height,...

Measuring jug with painted, raised scale; available in 0.5, 1 and 2 L. Ergonomic handle, stackable and food-compatible.

€9.44 €12.33

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.11

PRESSOL Measuring Jug — Gray, Polypropylene

Available in 0.5, 1 and 2 L. Painted, raised scale; ergonomic handle; oil- and acid-resistant; food-safe; break-proof, stable and stackable.

€13.38 €17.49

Discharge Spout for Metal Jerry Cans — 240 mm length, Ø12–21 mm, fits petrol jerrycans #38500349/#38500257

-€4.93

PRESSOL Discharge Spout for Metal Jerry Cans — 240 mm length, Ø12–21...

Steel discharge spout for petrol jerrycans; 240 mm length, Ø12–21 mm, olive‑green lacquer RAL 6003, 0.23 kg.

€16.06 €20.99

-€5.10

PRESSOL Workshop Oiler — 135 ml, White

Compact 200 ml workshop oiler with angled aluminium spout, double-acting brass pump, and drip-feed capability.

€16.58 €21.68

-€7.21

PRESSOL Brass Barrel Tap — Oil, Stainless Steel, Brass

Lever-operated, self-closing barrel tap with cord sealing. Connecting thread: G 3/4" male. Material: 1.4021 + HDPE. Dimensions 70 × 38 × 80 mm; weight 0,2 kg.

€23.46 €30.67

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€3.56

KIMPEX Heavy-Duty Spark Plug Wrench — Chrome

Robust service tool with plated T-handle for easier ignition component maintenance.

€11.56 €15.12

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS