TOOLS

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Tuff Jug Container with Ripper Cap — 10.2 L (2.7 US gal), White

-€10.33

TUFF JUG Tuff Jug Container with Ripper Cap — 10.2 L (2.7 US gal), White

Prevents sliding and spills in truck beds. Fast-flow ripper cap and view strip for easy level checks.

€29.19 €39.52

Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US gal Tuff Jug

-€2.81

TUFF JUG Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US...

Internally vented spout that provides fast flow with auto shut-off. Fits 5.3 US gal Tuff Jug containers.

€7.91 €10.72

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal fit, Red

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement ripper cap for fast, low-spill fluid transfer with 2.7 US gal containers.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US gal Tuff Jug Container — Red

Replacement ripper cap for fast, low-spill transfer with 5 US gal containers.

€22.40 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Orange

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Fast-flowing replacement cap for quick, spill-resistant fluid transfer. Easy to install and remove.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, orange

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for compatible utility jugs; twist-on installation reduces spills and provides a secure seal.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Blue

Fast-flowing replacement cap for 2.7 US gal containers.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — Blue

Fast-flowing cap for five-gallon utility jugs; steady pour with tool-free installation.

€22.40 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Green

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement cap that delivers fast, low-drip fluid transfer and simple snap-on installation.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, Green

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for 5 US gal containers; reduces drips and enables quicker fluid transfer.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Black

Fast-flow Ripper Cap for 2.7 US gal Tuff Jug containers — quick pours and reduced spills.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, black

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Replacement cap for 5 US gal containers; fast-flowing fluid transfer and easy installation.

€22.40 €30.32

-€13.76

TUFF JUG Tuff Jug VS RipperCap 20 L — Red

Fast filling — 20 L in 45 seconds with optimized caps for clean pouring. Versatile use almost anywhere. Easier handling than conventional metal canisters (20/10 L).

€38.90 €52.66

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

-€13.76

TUFF JUG 20L Gen 3 Renders — 20 L, Blue

Fast, clean 20 L filling in about 45 seconds. Compact, easy to handle and suitable for many tasks.

€38.90 €52.66

-€10.33

TUFF JUG Tuff Jug vs RipperCap 10 L — 10 L, Red

Fast, clean filling system — fills 10 liters in about 45 seconds; easy to handle and versatile for many tasks.

€29.19 €39.52

-€10.33

TUFF JUG 10L Gen 3 Renders — 10L, Blue

Fast-filling 10L system: fills 10 liters in 45 seconds. Easy to handle, versatile, and simpler to manage than metal canisters.

€29.19 €39.52

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€13.76

TUFF JUG Tuff Jug vs RipperCap 20 L — Orange

Fast, clean filling system that fills 20 liters in 45 seconds.

Easy to handle and usable virtually anywhere; ideal for general tasks.

€38.90 €52.66

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS