TOOLS

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€97.19

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€342.82 €440.01

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€171.80

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€244.53 €416.33

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€24.16

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€113.05 €137.21

-€25.31

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€118.40 €143.71

-€20.58

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€96.05 €116.63

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€7.03

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€32.84 €39.87

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€20.58

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€96.05 €116.63

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

CVO Cam Phaser Tool — Spool Valve, Silver

-€10.79

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€50.33 €61.12

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€15.27

PROGRESSIVE SUSPENSION Digital Gauge Pump — 0–300 psi, Black

Compact digital pump with accurate gauge and micro-adjust bleed for shocks and forks.

€71.27 €86.54

-€1.64

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€6.12 €7.76

-€7.35

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€27.35 €34.70

-€8.87

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€41.44 €50.31

-€3.81

PROGRESSIVE SUSPENSION Standard Shock Spring Tool — Shock spring, Black

Removes shock springs quickly and with less effort
Simple, easy-to-use operation
Fits most twin-shock motorcycle springs

€17.79 €21.60

Exhaust Gasket Installation Tool — fits '84–'24 Harley-Davidson & S&S Cycle

-€5.27

S&S CYCLE Exhaust Gasket Installation Tool — fits '84–'24...

Installs exhaust gaskets evenly; integrates with a 3/8" drive socket extension and fits tapered and straight gaskets.

€24.71 €29.98

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€39.41

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€128.14 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS