TOOLS

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Removable Wheel Chock — 6-1/2" tire, front, chrome

-€20.14

PINGEL Removable Wheel Chock — 6-1/2" tire, front, chrome

Removable chock secures a motorcycle wheel for transport and storage; brackets stay fastened while the chock is easily removed.

€93.96 €114.10

Variator Blocking Tool — Silver, Transmission

-€1.71

101 OCTANE Variator Blocking Tool — Silver, Transmission

Locking tool for quick installation and removal of the variator. Ideal for drivetrain work and piston stopping.

€7.95 €9.66

Variator Blocking Tool — Transmission, Silver

-€1.78

101 OCTANE Variator Blocking Tool — Transmission, Silver

Locking tool for quick installation and removal of the variator; protects the piston stopper and simplifies drivetrain work.

€8.28 €10.06

Variator Blocking Tool — Transmission, Black

-€2.43

101 OCTANE Variator Blocking Tool — Transmission, Black

Locks the variator for installation and removal. Quick, easy operation; prevents piston damage during maintenance.

€11.33 €13.76

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

-€37.45

KNIPEX Crimp Pliers — Blue, Red

Precision crimp pliers with factory-calibrated pressure, parallel die movement, and an integral self-releasing lock.

€121.72 €159.17

-€38.65

KNIPEX Crimp Pliers — Black, Metric

Plastic-cased crimp pliers with calibrated parallel crimping and a self-releasing mechanism for consistent results.

€125.64 €164.29

-€6.73

101 OCTANE Spring Tool — 125–155 mm outer diameter

Counterpressure spring mounting tool for convertor units (125–155 mm outer diameter). Compact and easy to use.

€31.36 €38.09

-€2.39

101 OCTANE Clutch Tool — Black

Specialist tool to lock the clutch bell for assembly or disassembly; enables quick, professional work.

€11.14 €13.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€16.62

101 OCTANE Crankcase Separator — 8 mm, Black

Universal crankcase separating tool. 140 mm leg length; maximum leg distance 240 mm. For use with up to M8 threads.

€77.64 €94.26

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€13.47

PINGEL Cylinder Head Stand — Yellow, Pair

Secure two-support mounting for cylinder head work; made in the U.S.A.

€62.86 €76.33

-€42.55

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€198.60 €241.15

-€1.59

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.45 €9.04

-€33.25

PINGEL Wheel Chock for Corrugated Floors — 3-1/2" tire width, Chrome

Removable wheel chock designed for corrugated beds and plywood trailers; includes mounting kit and leaves a near-flush bracket when removed.

€155.19 €188.44

Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

-€20.75

PINGEL Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

Stabilizes the front wheel for trailer transport; brackets stay in place while the chock is removed via a T-bolt hold-down screw. Made in the USA. Additional mounting kits sold separately.

€96.86 €117.61

-€3.75

101 OCTANE Locking Tool — Universal, Black

Universal locking tool for variator, flywheel mass/alternator and clutch service; two moving arms with 5 mm and 9 mm pins.

€17.47 €21.22

Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

-€12.52

PINGEL Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

Mounts in any bench vise and holds the cylinder head securely for all types of head work; shaft includes a drilled hole for wall storage; made in the U.S.A.

€58.44 €70.96

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€39.41

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€128.14 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS