TOOLS

-€2.73

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.76 €16.49

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€2.36

SHOW CHROME Tiedown Loop — 18" (45.5 cm), pair, red

18" looped nylon extension straps keep metal tie-down ends away from your bike. Sold in a two pack.

€3.00 €5.36

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

-€3.08

SHOW CHROME Filter Wrench — 64 mm (2-1/2"), oil filter, silver

12-sided addition for fast access to 17 mm and 12 mm drain plugs.

Includes drain plug wrench. Made in USA.

€14.33 €17.41

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

Folding Bike Stand — 181 kg (400 lb), Open 300×420×450 mm, Closed 600×50 mm, Yellow

-€13.70

POLISPORT Folding Bike Stand — 181 kg (400 lb), Open 300×420×450 mm,...

Official FIM podium folding bike stand — compact, lightweight and easy to carry. Open 300×420×450 mm; closes to 600×50 mm.

€44.55 €58.25

Folding Bike Stand — 181 kg (400 lb), Orange

-€13.70

POLISPORT Folding Bike Stand — 181 kg (400 lb), Orange

Official FIM podium folding bike stand with clever folding design; tough polypropylene and rubber construction; opens to 300 x 420 x 450 mm; compact when closed.

€44.55 €58.25

Folding Bike Stand — 300 mm × 420 mm × 450 mm, 181 kg (400 lb), blue

-€13.70

POLISPORT Folding Bike Stand — 300 mm × 420 mm × 450 mm, 181 kg (400...

Official FIM podium support with a collapsible design; lightweight and easy to carry. Open: 300×420×450 mm; closed: 600×50 mm; weight 3700 g (8.15 lb).

€44.55 €58.25

Folding Bike Stand — Open 300×420×450 mm, 181 kg, Red

-€13.70

POLISPORT Folding Bike Stand — Open 300×420×450 mm, 181 kg, Red

Official FIM Motocross World Championship podium bike stand with a clever folding design for compact storage; lightweight and portable for race day use.

€44.55 €58.25

-€13.70

POLISPORT Folding Bike Stand — 181 kg (400 lb), Green

Official FIM Motocross World Championship podium stand. Folding, lightweight (3700 g / 8.15 lb), compact closed size for easy storage.

€44.55 €58.25

Folding Bike Stand — 181 kg (400 lb), Polypropylene, Black

-€13.70

POLISPORT Folding Bike Stand — 181 kg (400 lb), Polypropylene, Black

Official FIM podium bike stand with a clever folding design for compact storage. Weighs 3700 g (8.15 lb). Open size: 300 mm × 420 mm × 450 mm. Closed size: 600 mm × 50 mm.

€44.55 €58.25

Folding Bike Stand — 181 kg (400 lb), Off-road/Sport, Black

-€13.70

POLISPORT Folding Bike Stand — 181 kg (400 lb), Off-road/Sport, Black

Official FIM podium folding stand with compact fold-away design. Lightweight, easy to carry, injection-molded rubber contact points. Open: 300 × 420 × 450 mm; Closed: 600 × 50 mm. Weighs 3700 g (8.15 lb).

€44.55 €58.25

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

-€13.68

POLISPORT Foldable Lift Bike Stand — 200 kg, black

Foldable lift bike stand with foot-pedal operation, safety lock, anti-slip pegs and tool pockets. Portable, folding and universal.

€87.07 €100.75

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€3.56

KIMPEX Heavy-Duty Spark Plug Wrench — Chrome

Robust service tool with plated T-handle for easier ignition component maintenance.

€11.56 €15.12

Tripod Stand — Ø10 mm, Ø14 mm bases, Center/Front/Rear fit, Black

-€5.86

POLISPORT Tripod Stand — Ø10 mm, Ø14 mm bases, Center/Front/Rear fit, Black

Reduces fork pressure during transport. Includes two interchangeable bases (Ø10 mm, Ø14 mm). Easy to position between the front wheel and mudguard for washing and maintenance.

€19.06 €24.92

-€42.55

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€198.60 €241.15

-€1.59

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.45 €9.04

-€0.96

POLISPORT Mud Remover — Dirt Bike, Black

Raised textured handle for a positive grip; cleans spokes, flat surfaces and tight crevices; built-in 8, 10 and 12 mm tool; holes for hanging on the Tool Storage Wall; curved edges won’t graze the motorcycle; use before power washing.

€3.12 €4.08

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€39.41

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€128.14 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS