TOOLS

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

-€27.58

PSR Roll-On Wheel Chock — 16"–21" wheel fit, front mounting

Heavy-duty, sturdy design. Fits wheels 16"–21".

€107.26 €134.84

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€14.75

PSR Econo Rear Stand — Adjustable 13.75–15 in, White powder-coated

Universal rear stand for swingarms with spools. Adjustable width 13.75"–15". Mild-steel construction. Optional non-spool hardware sold separately (sold in pairs).

€57.36 €72.11

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€25.71

PRO CIRCUIT Matrix Concepts™ Bike Stand — 42 cm height, center mount, Black

Lightweight polycarbonate bike stand with anti-flex supports and a wide rubber top for stable, durable support. Manufactured by Matrix Concepts™.

€115.68 €141.39

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€22.17

PSR Deluxe Rear Wheel Stand — 5-1/2" tire width, black powder-coated

Simplifies rear-wheel lifting with spooled lifting hardware, tool-less adjusters, large wheels, and 1-1/2" lightweight mild steel tubing.

€86.23 €108.40

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€13.88

PSR MX Lite Lift Stand — Black, powder-coated

Simple, light and durable stand for dirtbikes. Rubber padded lifting platform protects the frame and gives secure contact.

€53.98 €67.86

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73
New

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08
New

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25
New

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus

Professional motorcycle diagnostic kit with ECM programming, DTC read/clear, key fob reprogramming, stand-alone data logging, analog inputs and scopemeter capability.

€637.33 €801.21

-€6.09

FEULING OIL PUMP CORP. Tire Pressure Gauge — 0 psi - 60 psi

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€23.72 €29.81

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89
Out of Stock

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

-€30.56
Out of Stock

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 €149.41

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS