TOOLS

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€7.94

WOODY'S Spring Tool — 15" (38.1 cm), Silver

Provides better leverage to push, pull or twist springs into place. Looped handle for a comfortable grip. Made in the U.S.A.

€22.45 €30.39

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

$Bungee Net — 38 cm (15\"), Black$

-€0.85

EMGO Bungee Net — 38 cm (15\"), Black

Holds gear securely for travel and hauling.
Expands for flexible coverage.
Six coated hooks protect finishes.

€2.40 €3.25

-€0.87

EMGO Bungee Net — 38 cm (15 in), red

Versatile bungee net that stretches to secure loads, featuring six coated non-abrasive hooks.

€2.44 €3.31

-€0.87

EMGO Bungee Nets — 15" square, Blue

Versatile bungee cargo net with six coated hooks that stretches to secure varied loads.

€2.44 €3.31

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

-€42.55

DARKHORSE MOTOR COMPANY Universal TIR Tool Kit — Pinion shaft, Sprocket shaft, Black

Quick, accurate TIR measurement for pinion and sprocket shafts; includes magnets for spline checking; made in the USA.

€120.30 €162.85

-€41.29

DARKHORSE MOTOR COMPANY Engine Stand for Harley Davidson® M8 — Black powder-coated

Precision laser-cut support for Harley Davidson® M8 engines with wrinkle black powder-coat; made in the USA; adapter kit 3801-0444 available.

€116.70 €157.99

Adapter Kit for Harley Davidson® Engine Stand — Black, powder-coated steel

-€31.12

DARKHORSE MOTOR COMPANY Adapter Kit for Harley Davidson® Engine Stand — Black,...

Complete 50-year adapter kit for Harley Davidson® engine stands, covering 1970s Shovels through Late Model M8’s®; made in the USA.

€87.98 €119.10

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

-€1.37

SOLAS Drive Shaft Holding Tool — For YB, YD, YRS, YQ impellers

Secures the impeller driveshaft during maintenance for safe removal and installation.

€4.39 €5.76

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS