TOOLS

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€108.87

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€331.14 €440.01

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€180.14

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€236.19 €416.33

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

Legend Gear Saddle Strap SLS — 39 x 21 cm

-€8.60

SW-MOTECH Legend Gear Saddle Strap SLS — 39 x 21 cm

Secure strap for LS1/LS2 saddlebags; universal fit for straight bench seats; includes two double-clamping buckles.

€33.42 €42.02

-€1.72

SW-MOTECH Retention Strap Set for Tail Bags — 20 mm, 4 pack, Black

Replacement retention straps for tail bags. Includes four straps; easy to fit and adjust.

€6.68 €8.40

-€1.38

SW-MOTECH Tie-Down Strap Set for Tail Bags — 2 pack, black

Replacement tie-down straps for tail bags; includes 2 compression straps.

€5.34 €6.72

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

-€1.72

SW-MOTECH Tension Straps — 4-pack, Black

Replacement tension straps for Drybag 180/250/260/350/450/600/620/700. Includes 4 retention straps.

€6.68 €8.40

-€3.43

SW-MOTECH Strap Set Legend — Black

Set of four loop straps (80 cm) and two mounting straps (100 cm) for Legend Gear bags; polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH Strap Set Legend — SW-MOTECH, Cargo, Black

Legend Gear strap set — 4 loop straps (80 cm), 2 mounting straps (100 cm); polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH ROK Straps — 2-pack, black

Elastic ROK straps with metal buckle and quick-release fastener for secure luggage lashing.

€13.38 €16.81

-€4.29

SW-MOTECH ROK Straps — 2-pack, Black

Durable elastic straps with metal buckle and smooth-edged hardware for secure luggage lashing.

€16.72 €21.01

Legend Gear Shoulder Strap — 90–150 cm, Black

-€5.15

SW-MOTECH Legend Gear Shoulder Strap — 90–150 cm, Black

Padded LA4 shoulder strap converts accessory bags into a practical shoulder bag; adjustable 90–150 cm, with secure fastening straps and anodized aluminium hooks.

€20.06 €25.21

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

-€25.71

PRO CIRCUIT Matrix Concepts™ Bike Stand — 42 cm height, center mount, Black

Lightweight polycarbonate bike stand with anti-flex supports and a wide rubber top for stable, durable support. Manufactured by Matrix Concepts™.

€115.68 €141.39

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€10.29

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€40.02 €50.31

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

-€1.72

SW-MOTECH Multi Tool Keychain — Silver, Brushed

Compact multi-function key accessory with bottle opener, quick-release fastener opener for EVO and PRO side carriers, and hex keys in 14, 8, 10, 12 and 13 mm. Laser-etched logo.

€6.68 €8.40

Exhaust Gasket Installation Tool — fits '84–'24 Harley-Davidson & S&S Cycle

-€6.12

S&S CYCLE Exhaust Gasket Installation Tool — fits '84–'24...

Installs exhaust gaskets evenly; integrates with a 3/8" drive socket extension and fits tapered and straight gaskets.

€23.86 €29.98

-€31.95

REGINA Compact Chain Assembly and Rivet Tool — 5/8", 520/525/530, Black

Single-tool solution for chain assembly and four-sided riveting. Durable hardened construction. Made in Italy.

€41.91 €73.86

Regina Professional Chain Assembly Tool — roller chain, master link clip or rivet

-€2.06

REGINA Regina Professional Chain Assembly Tool — roller chain, master...

Professional assembly tool set for sealed chains. Works with press-fit and rivet links. Includes 1/2" and 5/8" tools. Made in Italy.

€3.23 €5.29

Regina Professional Chain Assembly Tool — 1/2" (420, 428), 5/8" (520, 530)

-€18.06

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional tool for assembling sealed chains; fits 420/428 (1/2") and 520/530 (5/8"). Made in Italy.

€54.97 €73.03

Regina Professional Chain Assembly Tool — Roller chain, rivet connector, steel

-€109.79

REGINA Regina Professional Chain Assembly Tool — Roller chain, rivet...

Professional assembly tool for sealed chains. Works with press-fit and rivet links. Sizes: 1/2" for 420/428, 5/8" for 520/530. Made in Italy.

€333.91 €443.70

-€17.15

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional assembly tool for Regina sealed chains. 1/2" for 420–428 and 5/8" for 520–530. Made in Italy.

€52.17 €69.32

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS