TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm (14")

On sale!
-€41.75

MOTORSPORT PRODUCTS Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm...

Lightweight aluminum ramp for loading off-road bikes and small ATVs. Rubber-coated fingers keep the ramp in place on a tailgate.

€87.20 €128.95

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

On sale!
-€6.52

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€18.43 €24.95

On sale!
-€6.66

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.83 €25.49

On sale!
-€10.15

MOTORSPORT PRODUCTS Wheel Chock — 3.5"–6.5" tire width, Black

Heavy-duty wedge chock stabilizes the front wheel during transport. Permanent mounting hardware included. Fits a wide range of tire widths.

€28.69 €38.84

Insulated Ratchet Set — Orange, Red, Set

-€96.31

WERA Insulated Ratchet Set — Orange, Red, Set

Insulated Zyklop VDE ratchets, sockets and extensions tested for safe use up to 1000 volts. 80-tooth fine-toothed ratchet, slim ergonomic grip and compact textile box with rotating socket holders.

€235.32 €331.63

$Pro Panel Stand — 43 cm (17\"), Red$

On sale!
-€34.95

MOTORSPORT PRODUCTS Pro Panel Stand — 43 cm (17\"), Red

Heavy-duty service stand with oil- and gas-resistant rubber top, arched frame for uneven ground, and non-slip surface.

€73.00 €107.95

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

$Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated$

On sale!
-€37.86

MOTORSPORT PRODUCTS Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated

Raises the front fork legs for easy wheel removal and cleaning; fits most sport bikes and includes a rubber-coated handle for comfort.

€79.09 €116.95

Lay-Over Stand — Silver, Off-Road & Mini Bike

On sale!
-€41.10

MOTORSPORT PRODUCTS Lay-Over Stand — Silver, Off-Road & Mini Bike

Compact, foldable lay-over stand that holds the bike safely off the ground for maintenance and track use. Seven grip heights (13"–19") and notched cradle for Bark Busters™ compatibility.

€85.85 €126.95

$SX1™ Stand — 43 cm (17\"), Blue$

-€20.05
Out of Stock

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Blue

Arched lower legs reduce rocking on uneven ground; oil- and gas-resistant rubber top; lightweight and affordable.

€41.90 €61.95

On sale!
-€13.92

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Green

Lightweight service stand with arched legs, oil- and gas-resistant rubber top, and a 3.5" drain access hole.

€39.38 €53.30

$SX1™ Stand — 43 cm (17\"), Orange$

On sale!
-€20.37

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Orange

Arched lower frame legs prevent rocking; 3.5" top hole for drain plug access; oil- and gas-resistant rubber top; very lightweight and affordable.

€42.58 €62.95

On sale!
-€20.05

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Yellow

Arched lower frame legs reduce rocking; 3.5" top hole gives drain plug access. Oil- and gas-resistant rubber top, very lightweight at 8 lb. Affordable and easy to use.

€41.90 €61.95

On sale!
-€20.37

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), White

Affordable, lightweight service stand with arched lower legs, 3.5" top hole for drain access, and oil- and gas-resistant rubber top.

€42.58 €62.95

SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue, powder-coated

-€11.84

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue,...

Compact service stand for mini-cycles with a stable arched base, access hole for oil changes, and a secured rubber top.

€28.41 €40.25

$SX1™ Mini Stand — 37 cm (14-1/2\") , Green$

On sale!
-€13.89

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14-1/2\") , Green

Stable, economical mini-cycle service stand with arched lower legs, secured rubber top, and a top hole for drain‑plug access.

€29.06 €42.95

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

On sale!
-€2.17

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€6.11 €8.28

On sale!
-€2.44

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€6.91 €9.35

On sale!
-€3.12

WERA Insulated Screwdriver — Orange

Insulated VDE blades for work up to 1000 volts; smooth hard and soft grip zones, Take ist easy color coding, hexagonal anti-roll and reduced shaft diameter.

€8.82 €11.94

On sale!
-€4.22

WERA Insulated Screwdriver — Orange

VDE-insulated blades rated for 1,000 V.
Multi-zone handle for fast turning and high torque transfer.
Color-coded end caps and hexagonal anti-roll feature.
Reduced shaft diameter for tight access.

€11.92 €16.14

On sale!
-€1.86

WERA Insulated Screwdriver — 05006170001, Orange

Insulated VDE blades rated to 1000 volts. Smooth hard zones for speed and soft grip zones for torque transfer. Hexagonal anti-roll and reduced shaft diameter for precise work.

€5.26 €7.12

Out of Stock

WERA Insulated Screwdriver

The Insulated Screwdriver features VDE blades for safe use at 1000 volts, ergonomic grip zones for torque transfer, and an anti-roll design.

€5.40

-€4.40

WERA Insulated Nutdriver — 8 mm, orange, red

Insulated nutdriver with VDE blades rated to 1000 volts, multi‑component handle for high torque transfer, handle markings and hexagonal anti‑roll feature.

€10.74 €15.14

On sale!
-€4.36

WERA Insulated Nutdriver — 9 mm, orange

VDE-insulated blades rated to 1000 V; multi-density handle with hard and soft zones for speed and torque; hexagonal anti-roll feature; zinc phosphate plated.

€12.33 €16.69

On sale!
-€4.75

WERA Insulated Nutdriver — 10 mm

Insulated VDE blades rated to 1,000 volts. Multi-component Kraftform handle with anti-roll hex and zinc phosphate plated finish.

€13.42 €18.17

On sale!
-€5.09

WERA Insulated Nutdriver — 11 mm, Orange

Insulated nutdriver with VDE-rated blades for safe work up to 1000 volts. Multi-component handle provides secure grip for both high-speed turning and high-torque transfer. Hexagonal anti-roll design and zinc phosphate plating enhance durability.

€14.36 €19.45

On sale!
-€5.83

WERA Insulated Nutdriver — 12 mm, Orange

VDE-insulated blades rated to 1000 V
Kraftform multi-component handle for speed and torque
Handle markings for quick identification
Hexagonal anti-roll feature
Zinc phosphate plated finish

€16.48 €22.31

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS