TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

-€6.52

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€21.20 €27.72

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€24.16

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€113.05 €137.21

-€6.66

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€21.66 €28.32

-€25.31

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€118.40 €143.71

-€20.58

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€96.05 €116.63

-€6.90

UFO Fork Block System — Black, Front

Secures the fork during transport, keeping the vehicle stable and minimizing suspension damage.

€12.02 €18.92

-€7.03

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€32.84 €39.87

Insulated Ratchet Set — Orange, Red, Set

-€96.31

WERA Insulated Ratchet Set — Orange, Red, Set

Insulated Zyklop VDE ratchets, sockets and extensions tested for safe use up to 1000 volts. 80-tooth fine-toothed ratchet, slim ergonomic grip and compact textile box with rotating socket holders.

€235.32 €331.63

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

-€2.65

UFO Mud Remover — Black

Makes cleanup fast and easy after a hard day's riding.

€6.35 €9.00

-€20.58

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€96.05 €116.63

CVO Cam Phaser Tool — Spool Valve, Silver

-€10.79

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€50.33 €61.12

-€20.67

UFO Folding Bike Stand — 200 kg (440 lb), black

Stable folding stand with non-slip support; fully foldable for compact storage and easy opening and closing.

€49.64 €70.31

-€20.67

UFO Folding Bike Stand — 200 kg (440 lb), Black

Stable, folding stand that opens and closes easily for compact storage and transport.

€49.64 €70.31

Folding Bike Stand — 200 kg (440 lb), Black, Red

-€20.67

UFO Folding Bike Stand — 200 kg (440 lb), Black, Red

Solid construction with a non-slip rubber support surface.
Fully foldable for compact storage and easy transport.
Easy opening and closing.

€49.64 €70.31

-€20.67

UFO Folding Bike Stand — 200 kg (440 lb), Black, Green

Solid construction with non-slip rubber support surface. Fully foldable for compact storage and transport. Easy opening and closing for everyday use.

€49.64 €70.31

-€20.67

UFO Folding Bike Stand — 200 kg (440 lb), Black, Blue

Compact folding bike stand with non-slip rubber support; folds flat for storage and offers easy opening and closing.

€49.64 €70.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€3.80

LIQUI MOLY Drain Valve — Red, White

Fits LIQUI MOLY® 20 L canisters with ventilation and DIN 61 thread. Enables draining without ventilation to minimize spills.

€12.33 €16.13

-€2.16

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€7.04 €9.20

-€2.45

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€7.95 €10.40

-€3.12

WERA Insulated Screwdriver — Orange

Insulated VDE blades for work up to 1000 volts; smooth hard and soft grip zones, Take ist easy color coding, hexagonal anti-roll and reduced shaft diameter.

€10.14 €13.26

-€4.22

WERA Insulated Screwdriver — Orange

VDE-insulated blades rated for 1,000 V.
Multi-zone handle for fast turning and high torque transfer.
Color-coded end caps and hexagonal anti-roll feature.
Reduced shaft diameter for tight access.

€13.72 €17.94

-€1.86

WERA Insulated Screwdriver — 05006170001, Orange

Insulated VDE blades rated to 1000 volts. Smooth hard zones for speed and soft grip zones for torque transfer. Hexagonal anti-roll and reduced shaft diameter for precise work.

€6.05 €7.91

Out of Stock

WERA Insulated Screwdriver

The Insulated Screwdriver features VDE blades for safe use at 1000 volts, ergonomic grip zones for torque transfer, and an anti-roll design.

€5.40

-€4.40

WERA Insulated Nutdriver — 8 mm, orange, red

Insulated nutdriver with VDE blades rated to 1000 volts, multi‑component handle for high torque transfer, handle markings and hexagonal anti‑roll feature.

€10.74 €15.14

-€4.36

WERA Insulated Nutdriver — 9 mm, orange

VDE-insulated blades rated to 1000 V; multi-density handle with hard and soft zones for speed and torque; hexagonal anti-roll feature; zinc phosphate plated.

€14.19 €18.55

-€4.74

WERA Insulated Nutdriver — 10 mm

Insulated VDE blades rated to 1,000 volts. Multi-component Kraftform handle with anti-roll hex and zinc phosphate plated finish.

€15.44 €20.18

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS