TOOLS

-€25.68

KIBBLEWHITE Valve Guide Reamer — 181 mm (7.125"), Nickel

Precision reamer for valve guides designed for KPMI® manganese bronze and cast iron.

Do not use a reamer on bronze after it has been used on cast iron.

€72.64 €98.32

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm (14")

On sale!
-€41.75

MOTORSPORT PRODUCTS Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm...

Lightweight aluminum ramp for loading off-road bikes and small ATVs. Rubber-coated fingers keep the ramp in place on a tailgate.

€87.20 €128.95

On sale!
-€10.15

MOTORSPORT PRODUCTS Wheel Chock — 3.5"–6.5" tire width, Black

Heavy-duty wedge chock stabilizes the front wheel during transport. Permanent mounting hardware included. Fits a wide range of tire widths.

€28.69 €38.84

-€8.16

KIBBLEWHITE Valve Guide Ball Hone — 7.0 mm, Black, Silver

Ball hone for sizing valve guide materials; durable for C630 bronze and cast iron. Made in the U.S.A.

€23.10 €31.26

$Pro Panel Stand — 43 cm (17\"), Red$

On sale!
-€34.95

MOTORSPORT PRODUCTS Pro Panel Stand — 43 cm (17\"), Red

Heavy-duty service stand with oil- and gas-resistant rubber top, arched frame for uneven ground, and non-slip surface.

€73.00 €107.95

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

$Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated$

On sale!
-€37.86

MOTORSPORT PRODUCTS Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated

Raises the front fork legs for easy wheel removal and cleaning; fits most sport bikes and includes a rubber-coated handle for comfort.

€79.09 €116.95

Lay-Over Stand — Silver, Off-Road & Mini Bike

On sale!
-€41.10

MOTORSPORT PRODUCTS Lay-Over Stand — Silver, Off-Road & Mini Bike

Compact, foldable lay-over stand that holds the bike safely off the ground for maintenance and track use. Seven grip heights (13"–19") and notched cradle for Bark Busters™ compatibility.

€85.85 €126.95

$SX1™ Stand — 43 cm (17\"), Blue$

-€20.05
Out of Stock

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Blue

Arched lower legs reduce rocking on uneven ground; oil- and gas-resistant rubber top; lightweight and affordable.

€41.90 €61.95

On sale!
-€13.92

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Green

Lightweight service stand with arched legs, oil- and gas-resistant rubber top, and a 3.5" drain access hole.

€39.38 €53.30

$SX1™ Stand — 43 cm (17\"), Orange$

On sale!
-€20.37

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Orange

Arched lower frame legs prevent rocking; 3.5" top hole for drain plug access; oil- and gas-resistant rubber top; very lightweight and affordable.

€42.58 €62.95

On sale!
-€20.05

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Yellow

Arched lower frame legs reduce rocking; 3.5" top hole gives drain plug access. Oil- and gas-resistant rubber top, very lightweight at 8 lb. Affordable and easy to use.

€41.90 €61.95

On sale!
-€20.37

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), White

Affordable, lightweight service stand with arched lower legs, 3.5" top hole for drain access, and oil- and gas-resistant rubber top.

€42.58 €62.95

SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue, powder-coated

-€11.84

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue,...

Compact service stand for mini-cycles with a stable arched base, access hole for oil changes, and a secured rubber top.

€28.41 €40.25

$SX1™ Mini Stand — 37 cm (14-1/2\") , Green$

On sale!
-€13.89

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14-1/2\") , Green

Stable, economical mini-cycle service stand with arched lower legs, secured rubber top, and a top hole for drain‑plug access.

€29.06 €42.95

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€8.50

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

-€8.71
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

-€20.99

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 €80.40

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

-€31.85

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 €121.94

$Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm (0.3780\"), 181 mm (7.125\")$

-€25.75

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm...

Precision reamer for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters ± .0002".

€72.84 €98.59

$Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm (0.31\"), 181 mm (7.125\"), Nickel$

-€27.10

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel-aluminum bronze. Cutting diameters ±0.0002"

€76.72 €103.82

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS