TOOLS

-€3.58

BIKE LIFT Flange Adapter — for Minarelli engines

Precision flange adapter for Minarelli engines. Machined steel construction for secure fit; simple installation.

€15.42 €19.00

-€3.58

BIKE LIFT Flange Adapter — For Piaggio engines

Precision flange adapter for Piaggio engines. Durable steel construction; easy to install.

€15.42 €19.00

Pinion Gear Locker Tool — pinion gear, Black

-€13.98

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€65.25 €79.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€2.10

KELLERMANN Replacement Pins for KTW 2.5 — 130.240, Steel

Precision replacement pins for KTW 2.5, compatible with pin punch 4xx, pin punch 5xx and 6xx.

€14.66 €16.76

-€4.24

KELLERMANN Upgrade set KTW 2.0 → KTW 2.5 — Black steel finish

Upgrade set for KTW 2.0 to KTW 2.5 including pin punches 4xx–6xx, fence, fixing screw and pressure screw for accurate chain work.

€29.33 €33.57

-€30.95

BIKE LIFT Folding Ramp — 240 cm L, 28 cm W, 275 kg capacity

Makes loading and unloading your bike easier. 275 kg capacity. Measures 240 cm L x 28 cm W. Includes tie-down and rubber-coated hook.

€133.49 €164.44

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€20.47

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€95.53 €116.00

-€72.84

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€339.92 €412.76

-€8.47

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€39.53 €48.00

-€85.79

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€400.34 €486.13

-€23.31

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€108.80 €132.11

-€13.98

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€65.25 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€94.93

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€442.96 €537.89

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€61.30

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€286.07 €347.37

-€14.14

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€65.96 €80.10

-€49.70

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€231.93 €281.63

-€7.12

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€33.22 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€76.98

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€359.21 €436.19

Replacement Puller Plate — Black, Chrome

-€18.55

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€86.58 €105.13

-€49.37

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€160.35 €209.72

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

-€18.21

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€84.95 €103.16

-€36.37

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€169.74 €206.11

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€59.92

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€279.61 €339.53

Automatic Wheel Clamp — Motorcycle, Black

-€15.24

BIKE LIFT Automatic Wheel Clamp — Motorcycle, Black

Automatic wheel clamp for secure positioning on bike lifts and safe transport on trucks or trailers.

€184.45 €199.69

-€3.71

BIKE LIFT Automatic Wheel Clamp — Black

Secure, easy-to-fit wheel clamp with a patented locking mechanism. Compatible with bike lifts; mountable on trucks or trailers.

€17.29 €21.00

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€26.83

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€125.20 €152.03

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€17.75

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€82.81 €100.56

-€19.22

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€89.67 €108.89

-€9.91

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€46.25 €56.16

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS