TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

-€27.58

PSR Roll-On Wheel Chock — 16"–21" wheel fit, front mounting

Heavy-duty, sturdy design. Fits wheels 16"–21".

€107.26 €134.84

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

-€14.75

PSR Econo Rear Stand — Adjustable 13.75–15 in, White powder-coated

Universal rear stand for swingarms with spools. Adjustable width 13.75"–15". Mild-steel construction. Optional non-spool hardware sold separately (sold in pairs).

€57.36 €72.11

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID, stainless steel and plastic

-€43.34

BLACK BEARING Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID,...

Set of 8 pullers with a lead rod for removing bearings with 8–30 mm internal diameter; stainless steel and plastic construction.

€122.49 €165.83

-€83.89

BLACK BEARING Bearings Assembly Press "Press2" — Blue

Precision bearings assembly press with 34 CNC-machined anodized aluminum shims; includes case and shim kit; fits a wide range of bearing models.

€237.07 €320.96

Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

-€104.11

BLACK BEARING Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

Case for assembly and disassembly of frame pivot bearings. Not compatible with wheels or bottom brackets. Stainless steel and plastic construction.

€294.22 €398.33

Angle Measuring Tool — Stainless steel, Headset bearing

-€4.33

BLACK BEARING Angle Measuring Tool — Stainless steel, Headset bearing

Precision gauge for headset bearing angles with four measurement points: 36° and 45° inside and outside.

€12.25 €16.58

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

-€22.17

PSR Deluxe Rear Wheel Stand — 5-1/2" (13.97 cm), Black, Rear

Rear stand with included spooled lifting hardware, tool-less adjusters, and large wheels for easy rolling.

€86.23 €108.40

-€10.33

K&L SUPPLY MC450 Rubber Pad — Center Jack, black

Rubber non-skid pad with self-adhesive backing mounts on top of the MC450 center jack for added grip and protection.

€29.19 €39.52

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.