TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€3.19

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.30 €16.49

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

Legend Gear Saddle Strap SLS — 39 x 21 cm

-€8.60

SW-MOTECH Legend Gear Saddle Strap SLS — 39 x 21 cm

Secure strap for LS1/LS2 saddlebags; universal fit for straight bench seats; includes two double-clamping buckles.

€33.42 €42.02

-€1.72

SW-MOTECH Retention Strap Set for Tail Bags — 20 mm, 4 pack, Black

Replacement retention straps for tail bags. Includes four straps; easy to fit and adjust.

€6.68 €8.40

-€1.38

SW-MOTECH Tie-Down Strap Set for Tail Bags — 2 pack, black

Replacement tie-down straps for tail bags; includes 2 compression straps.

€5.34 €6.72

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

-€1.72

SW-MOTECH Tension Straps — 4-pack, Black

Replacement tension straps for Drybag 180/250/260/350/450/600/620/700. Includes 4 retention straps.

€6.68 €8.40

-€3.43

SW-MOTECH Strap Set Legend — Black

Set of four loop straps (80 cm) and two mounting straps (100 cm) for Legend Gear bags; polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH Strap Set Legend — SW-MOTECH, Cargo, Black

Legend Gear strap set — 4 loop straps (80 cm), 2 mounting straps (100 cm); polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH ROK Straps — 2-pack, black

Elastic ROK straps with metal buckle and quick-release fastener for secure luggage lashing.

€13.38 €16.81

-€4.29

SW-MOTECH ROK Straps — 2-pack, Black

Durable elastic straps with metal buckle and smooth-edged hardware for secure luggage lashing.

€16.72 €21.01

-€2.36

SHOW CHROME Tiedown Loop — 18" (45.5 cm), pair, red

18" looped nylon extension straps keep metal tie-down ends away from your bike. Sold in a two pack.

€3.00 €5.36

Legend Gear Shoulder Strap — 90–150 cm, Black

-€5.15

SW-MOTECH Legend Gear Shoulder Strap — 90–150 cm, Black

Padded LA4 shoulder strap converts accessory bags into a practical shoulder bag; adjustable 90–150 cm, with secure fastening straps and anodized aluminium hooks.

€20.06 €25.21

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€3.57

SHOW CHROME Filter Wrench — 64 mm (2-1/2"), oil filter, silver

12-sided addition for fast access to 17 mm and 12 mm drain plugs.

Includes drain plug wrench. Made in USA.

€13.84 €17.41

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€10.29

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€40.02 €50.31

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

-€1.72

SW-MOTECH Multi Tool Keychain — Silver, Brushed

Compact multi-function key accessory with bottle opener, quick-release fastener opener for EVO and PRO side carriers, and hex keys in 14, 8, 10, 12 and 13 mm. Laser-etched logo.

€6.68 €8.40

Exhaust Gasket Installation Tool — fits '84–'24 Harley-Davidson & S&S Cycle

-€6.12

S&S CYCLE Exhaust Gasket Installation Tool — fits '84–'24...

Installs exhaust gaskets evenly; integrates with a 3/8" drive socket extension and fits tapered and straight gaskets.

€23.86 €29.98

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS