TOOLS

-€25.68

KIBBLEWHITE Valve Guide Reamer — 181 mm (7.125"), Nickel

Precision reamer for valve guides designed for KPMI® manganese bronze and cast iron.

Do not use a reamer on bronze after it has been used on cast iron.

€72.64 €98.32

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€8.16

KIBBLEWHITE Valve Guide Ball Hone — 7.0 mm, Black, Silver

Ball hone for sizing valve guide materials; durable for C630 bronze and cast iron. Made in the U.S.A.

€23.10 €31.26

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

HARDLINE Deluxe Rollastand — Black

One-person roll stand that lets the wheel turn for cleaning and chain adjustment. Sealed bearings and nonslip backing for stable, safe use.

€25.38

Exhaust Spring Puller Tool — T-handle, Black

-€5.79

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€9.22 €15.01

Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH, KP, SD, SF, SK, ST, YH, YJ impellers

-€2.06

SOLAS Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH,...

Makes impeller installation quick and simple; match tool application to impeller series to find the proper tool.

€6.57 €8.63

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

Impeller Installation Tool — fits PA, PB, PF, PL, TA, TB impellers

-€1.89

SOLAS Impeller Installation Tool — fits PA, PB, PF, PL, TA, TB...

Makes installing an impeller quick and easy.

Match the tool application to your impeller series to ensure proper fit.

€6.05 €7.94

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

Tread Doctor Tire Cutting Tool — Black, Stainless Steel

-€15.90

HARDLINE Tread Doctor Tire Cutting Tool — Black, Stainless Steel

Refreshes front or rear tires with a heated carbide blade; plug-in operation and easily resharpens for long life.

€44.92 €60.82

HARDLINE Tread Doctor Carbide Cutting Blade

The Tread Doctor Carbide Cutting Blade is an essential tool for refreshing tire tread before installation of new tires. It features a heated carbide cutting blade for effective trimming and is easy to use.

€7.67

-€3.05

HARDLINE Thread Doctor™ Sniper Tool — HARDLINE, TD-SNIPER, Tire, Brass

Precision cutting tool for tread repair. Fits Tread Doctor™ heating irons. Cuts 1/4" grooves with adjustable depth.

€11.90 €14.95

-€21.68

HARDLINE Tread Doc — HARDLINE Tread, Kit

Heated carbide cutting tool for knobby tires. Angled cutting head for thin slices, forged carbide blade for lasting sharpness. Includes on/off switch and holding stand; works on any motorcycle tire.

€61.30 €82.98

-€1.83

HARDLINE Tread Doc — Tire

Heated carbide cutting tool for knobby tires; angled head for thin slices to extend tire life. Includes holding stand and on/off switch.

€7.12 €8.95

-€37.17

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€65.06 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€8.50
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS