TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm (14")

On sale!
-€41.75

MOTORSPORT PRODUCTS Aluminum Loading Ramp — 183 cm (6'), 227 kg (500 lb), 35.6 cm...

Lightweight aluminum ramp for loading off-road bikes and small ATVs. Rubber-coated fingers keep the ramp in place on a tailgate.

€87.20 €128.95

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

On sale!
-€10.15

MOTORSPORT PRODUCTS Wheel Chock — 3.5"–6.5" tire width, Black

Heavy-duty wedge chock stabilizes the front wheel during transport. Permanent mounting hardware included. Fits a wide range of tire widths.

€28.69 €38.84

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

$Pro Panel Stand — 43 cm (17\"), Red$

On sale!
-€34.95

MOTORSPORT PRODUCTS Pro Panel Stand — 43 cm (17\"), Red

Heavy-duty service stand with oil- and gas-resistant rubber top, arched frame for uneven ground, and non-slip surface.

€73.00 €107.95

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

$Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated$

On sale!
-€37.86

MOTORSPORT PRODUCTS Front Sport Bike Stand — 28.5 cm (11-1/4\"), black powder-coated

Raises the front fork legs for easy wheel removal and cleaning; fits most sport bikes and includes a rubber-coated handle for comfort.

€79.09 €116.95

Lay-Over Stand — Silver, Off-Road & Mini Bike

On sale!
-€41.10

MOTORSPORT PRODUCTS Lay-Over Stand — Silver, Off-Road & Mini Bike

Compact, foldable lay-over stand that holds the bike safely off the ground for maintenance and track use. Seven grip heights (13"–19") and notched cradle for Bark Busters™ compatibility.

€85.85 €126.95

$SX1™ Stand — 43 cm (17\"), Blue$

-€20.05
Out of Stock

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Blue

Arched lower legs reduce rocking on uneven ground; oil- and gas-resistant rubber top; lightweight and affordable.

€41.90 €61.95

On sale!
-€13.92

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Green

Lightweight service stand with arched legs, oil- and gas-resistant rubber top, and a 3.5" drain access hole.

€39.38 €53.30

$SX1™ Stand — 43 cm (17\"), Orange$

On sale!
-€20.37

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17\"), Orange

Arched lower frame legs prevent rocking; 3.5" top hole for drain plug access; oil- and gas-resistant rubber top; very lightweight and affordable.

€42.58 €62.95

On sale!
-€20.05

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), Yellow

Arched lower frame legs reduce rocking; 3.5" top hole gives drain plug access. Oil- and gas-resistant rubber top, very lightweight at 8 lb. Affordable and easy to use.

€41.90 €61.95

On sale!
-€20.37

MOTORSPORT PRODUCTS SX1™ Stand — 43 cm (17"), White

Affordable, lightweight service stand with arched lower legs, 3.5" top hole for drain access, and oil- and gas-resistant rubber top.

€42.58 €62.95

SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue, powder-coated

-€11.84

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14.5"), Mini Bike, blue,...

Compact service stand for mini-cycles with a stable arched base, access hole for oil changes, and a secured rubber top.

€28.41 €40.25

$SX1™ Mini Stand — 37 cm (14-1/2\") , Green$

On sale!
-€13.89

MOTORSPORT PRODUCTS SX1™ Mini Stand — 37 cm (14-1/2\") , Green

Stable, economical mini-cycle service stand with arched lower legs, secured rubber top, and a top hole for drain‑plug access.

€29.06 €42.95

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS