TOOLS

-€3.09

TWIN AIR Liquid Cleaning Tub — Air filter, Orange, White

Resealable cleaning container with removable tray that lets debris sink to the bottom for easy cleaning.

€10.06 €13.15

-€1.29

TWIN AIR Liquid Power Filter Oil and Oiling Tub — Orange, White

Submerge foam air filters in oil for even coverage, then wring excess back into the tub for easy reuse.

€4.20 €5.49

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€9.09

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€23.51

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€52.00 €75.51

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€17.08

Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5" tie-downs, Black

DRAG SPECIALTIES Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5"...

Slides over existing tie-down extensions to protect paint and chrome. Made in the U.S.A.

€18.91

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

DRAG SPECIALTIES Clear Timing Hole Plug — 41.3 mm (1-5/8"), timing mark

Locates the timing mark without getting an eye full of oil.

€11.80

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€9.32

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€37.83

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable for quick fluid removal.

€85.00 €122.83

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

-€9.94

PRESSOL Barrel Pump — Black, stainless steel, PRESSOL

Steel-pipe barrel pump for 60/200/220 l containers. Delivery 16 l/min. For oils up to SAE 90. Packed in single carton box.

€32.31 €42.25

Multi-Purpose Drain Pan — 6 L, 400 x 390 x 120 mm, Black

-€1.83

PRESSOL Multi-Purpose Drain Pan — 6 L, 400 x 390 x 120 mm, Black

6 L multi-purpose drain pan with inner scale, robust handles, stackable design and break-proof polyethylene construction.

€5.98 €7.81

-€4.60

PRESSOL Multi-Purpose Drain Tray — 7 l, 500 x 300 x 130 mm, Black

7 l multi-purpose drain tray for oil changes and parts cleaning; lock-up discharge spout, robust carrying handle, base 500 x 300 mm, height 130 mm, break-proof.

€14.93 €19.53

-€4.47

PRESSOL Industrial Sprayer Double Acting — 750 ml, red, black

Double-acting 750 ml industrial sprayer with adjustable atomizer head and flexible hose; ideal for thin liquids such as lubricants and cleaners.

€14.49 €18.96

-€1.18

PRESSOL Measuring Jug — 0.5 l, 1 l, 2 l, clear

Measuring jug in 0.5 l, 1 l and 2 l sizes; painted raised scale, ergonomic handle, chemical-resistant and stackable.

€3.84 €5.02

Measuring Jug — 0.5 L, 1 L, 2 L, Polypropylene, 245 mm height, 210 x 150 mm base

-€2.89

PRESSOL Measuring Jug — 0.5 L, 1 L, 2 L, Polypropylene, 245 mm height,...

Measuring jug with painted, raised scale; available in 0.5, 1 and 2 L. Ergonomic handle, stackable and food-compatible.

€9.44 €12.33

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.11

PRESSOL Measuring Jug — Gray, Polypropylene

Available in 0.5, 1 and 2 L. Painted, raised scale; ergonomic handle; oil- and acid-resistant; food-safe; break-proof, stable and stackable.

€13.38 €17.49

Discharge Spout for Metal Jerry Cans — 240 mm length, Ø12–21 mm, fits petrol jerrycans #38500349/#38500257

-€4.93

PRESSOL Discharge Spout for Metal Jerry Cans — 240 mm length, Ø12–21...

Steel discharge spout for petrol jerrycans; 240 mm length, Ø12–21 mm, olive‑green lacquer RAL 6003, 0.23 kg.

€16.06 €20.99

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS