TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.62

SADDLEMEN 1" W Strap Extensions — 25.4 mm (1"), 97 cm (38"), Black

Length-adjustable nylon straps that fit D-rings on most bags.

€11.76 €15.38

Quick-Detach Strap Kit — 97 cm (38") length, 25.4 mm (1") width, Black, Pair

-€4.22

SADDLEMEN Quick-Detach Strap Kit — 97 cm (38") length, 25.4 mm (1")...

Two length-adjustable nylon straps with multiple buckles for versatile cargo mounting; includes two extra female buckles for custom setups.

€13.73 €17.95

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

F15 Multi-Tool — 164 g, 8–12-speed chain tool, Black

-€10.50

CRANKBROTHERS F15 Multi-Tool — 164 g, 8–12-speed chain tool, Black

Thin, lightweight 15-tool multitool with magnetic case that doubles as a handle and built-in bottle opener. 164 g.

€31.51 €42.01

-€8.41

CRANKBROTHERS M20 Multi-Tool — 89 mm, 203 g

Compact 20-function multi-tool with integrated tire plug storage, chain-tool for 8–12-speed drivetrains, and a full set of hex, Torx, spoke and screwdriver bits.

€25.20 €33.61

-€8.41

CRANKBROTHERS M20 Multi-Tool — 203 g, 89 mm, Gold

20-function compact bike multi-tool with integrated tire plug tool and mountable storage case for on-the-road repairs.

€25.20 €33.61

-€7.77

CRANKBROTHERS M19 Multi-Tool — Nickel, 2–10 mm, T10, T25

Compact, high-tensile steel multi-tool with side grips; weighs 175 g and measures 89 mm. Includes chain tool (8/9/10/11/12-speed), hex wrenches, open wrenches, screwdrivers, spoke wrench and T10/T25 Torx®.

€23.31 €31.08

-€7.77

CRANKBROTHERS M19 Multi-Tool — Black, 2–10 mm, T10, T25

Lightweight 175 g multi-tool with chain tool, hex set (2–8 mm), 8/10 mm open wrenches, spoke keys and Torx T10/T25 for quick repairs.

€23.31 €31.08

-€6.29

CRANKBROTHERS M17 Multi-Tool — 168 g, 89 mm, Gold

High-tensile steel multi-tool with side grips; includes chain tool, hex set, open wrenches, screwdrivers, spoke wrench, and T25 Torx.

€18.91 €25.20

-€6.29

CRANKBROTHERS M17 Multi-Tool — 2–10 mm hex, T25, Black

Compact multi-tool, 168 g and 89 mm long, with chain tool compatible with 8–12 speed and a full set of hex, Torx, screwdriver, and spoke wrenches.

€18.91 €25.20

Speedier Tire Lever — 144 mm, 26 g, Black

-€1.25

CRANKBROTHERS Speedier Tire Lever — 144 mm, 26 g, Black

Single lever removes and installs tires while protecting knuckles. Weighs 26 g; 144 mm long.

€3.78 €5.03

Cigar Tool Plug Kit and CO2 Head — 78 mm L x 30 mm W, Presta only, Black, Silver

-€7.56

CRANKBROTHERS Cigar Tool Plug Kit and CO2 Head — 78 mm L x 30 mm W, Presta...

Compact tubeless repair kit with CO2 adapter, aluminum storage case, bottle cage bracket, five plugs included. Measures 78 mm × 30 mm; 55 g. CO2 cartridge sold separately.

€17.64 €25.20

-€1.25

CRANKBROTHERS Tire Plug Refill Kit — 10-pack

Refill plugs for cigar-style multi-tools (F11/F16, M13/M20, S.O.S.). Vulcanized rubber seals tubeless punctures without removing the tire.

€2.94 €4.19

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

-€9.94

PRESSOL Barrel Pump — Black, stainless steel, PRESSOL

Steel-pipe barrel pump for 60/200/220 l containers. Delivery 16 l/min. For oils up to SAE 90. Packed in single carton box.

€32.31 €42.25

Multi-Purpose Drain Pan — 6 L, 400 x 390 x 120 mm, Black

-€1.83

PRESSOL Multi-Purpose Drain Pan — 6 L, 400 x 390 x 120 mm, Black

6 L multi-purpose drain pan with inner scale, robust handles, stackable design and break-proof polyethylene construction.

€5.98 €7.81

-€4.60

PRESSOL Multi-Purpose Drain Tray — 7 l, 500 x 300 x 130 mm, Black

7 l multi-purpose drain tray for oil changes and parts cleaning; lock-up discharge spout, robust carrying handle, base 500 x 300 mm, height 130 mm, break-proof.

€14.93 €19.53

-€4.47

PRESSOL Industrial Sprayer Double Acting — 750 ml, red, black

Double-acting 750 ml industrial sprayer with adjustable atomizer head and flexible hose; ideal for thin liquids such as lubricants and cleaners.

€14.49 €18.96

-€1.18

PRESSOL Measuring Jug — 0.5 l, 1 l, 2 l, clear

Measuring jug in 0.5 l, 1 l and 2 l sizes; painted raised scale, ergonomic handle, chemical-resistant and stackable.

€3.84 €5.02

Measuring Jug — 0.5 L, 1 L, 2 L, Polypropylene, 245 mm height, 210 x 150 mm base

-€2.89

PRESSOL Measuring Jug — 0.5 L, 1 L, 2 L, Polypropylene, 245 mm height,...

Measuring jug with painted, raised scale; available in 0.5, 1 and 2 L. Ergonomic handle, stackable and food-compatible.

€9.44 €12.33

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS