TOOLS

-€5.62

MOTION PRO T-Handle Tool Rack — Chrome, steel

One-piece T-handle rack holds up to eleven tools and mounts to most tool boxes for quick access.

€15.86 €21.48

Tappet Screen Plug Tool — for big twin (excl. twin cam), slotted screw tappet screen cover, black

-€2.81

MOTION PRO Tappet Screen Plug Tool — for big twin (excl. twin cam),...

Removes and installs tappet oil filter screen plugs for big twin models (excl. twin cam); fits a 7/16" combination wrench.

€7.95 €10.76

Racer Mini-Pro T-Handle Tool Set — 171.5 mm, 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, pewter, nickel

-€9.91

MOTION PRO Racer Mini-Pro T-Handle Tool Set — 171.5 mm, 8 mm, 10 mm, 12...

Compact T-handle set with vinyl pouch and chrome-vanadium shafts for easy transport and quick access.

€28.00 €37.91

Belt Tension Gauge — 10 lb spec, Black, Silver

-€7.39

MOTION PRO Belt Tension Gauge — 10 lb spec, Black, Silver

Compact belt tension gauge with graduated scale and L-shaped pad; measures to a 10 lb specification.

€20.89 €28.28

-€2.81

MOTION PRO Dual Drive Mini T-Handle Tool — 3/8" drive, 196.9 mm (7-3/4")

T-handle and shaft-drive combination for tight access and quick fastener work.

€7.95 €10.76

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Flywheel Puller Right Hand Internal Thread — M35 x 1.5, black oxide

-€10.35

MOTION PRO Flywheel Puller Right Hand Internal Thread — M35 x 1.5, black...

Precision right-hand internal thread puller for safe removal of flywheels or rotors. Heat treated, durable finish, lifetime limited warranty.

€29.25 €39.60

-€5.03

MOTION PRO Rocker Box Wrench — Rocker Box Cover, Black

Designed to reach 3/16" hex screws on the rocker boxes of Big Twin, Sportster and Buell models. Vinyl-covered area reduces the chance of surface damage. 3/8" drive for torque-tool use.

€14.20 €19.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Adapter for Air-Cooled Engine — 19 mm OD, 55 mm length, 2-stroke, Silver

-€4.14

MOTION PRO Adapter for Air-Cooled Engine — 19 mm OD, 55 mm length,...

Enables use of water-cooled 2-stroke timing kits on air-cooled engines with 14 mm spark plugs. Includes extended thread adapter and dial indicator extension. Not compatible with Yamaha RD two-stroke twins while engine is in frame.

€11.69 €15.83

-€47.64

MOTION PRO Timing Kit — Water Cooled, 2-Stroke, Silver

Dial indicator set with extensions and a 14 mm spark plug thread adapter; 1-1/2" gauge face for accurate timing checks.

€134.61 €182.25

-€32.63

MOTION PRO Deluxe Suspension Bearing Service Tool — Blue anodized

Quick removal and precise installation of 20 mm and 22 mm suspension bearings; includes blind bearing collet and protective case.

€188.30 €220.93

Dual Drive T-Handle Set — 4, 5, 6, 8 mm hex, 171.5 mm, Nickel pewter

-€15.63

MOTION PRO Dual Drive T-Handle Set — 4, 5, 6, 8 mm hex, 171.5 mm, Nickel...

Four-piece T-handle hex set with ball-end for angled access up to 25°; ideal for shaft-mounted fasteners and tight spaces.

€44.18 €59.81

Dual-Drive Allen T-Handle — 5 mm, 171.5 mm (6-3/4"), Nickel Pewter

-€3.70

MOTION PRO Dual-Drive Allen T-Handle — 5 mm, 171.5 mm (6-3/4"), Nickel...

T-handle hex for quick tightening and loosening; ball end reaches Allen-head bolts up to 25°.

€10.43 €14.13

-€3.41

MOTION PRO Dual-Drive Allen T-Handle — 6 mm, 171.5 mm

T-handle Allen key with a ball-end tip for quick installation and angled access up to 25°.

€9.60 €13.01

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€8.87

MOTION PRO Metric Socket T-Handle Set — Set of 4, 8 mm, 10 mm, 12 mm, 14 mm

Slim, durable socket set with an ergonomic handle and deep six-point sockets; includes a vinyl storage pouch.

€25.06 €33.93

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

Metric Socket T-Handle Set — 8 mm, 10 mm, 12 mm, 14 mm, 17 mm, 19 mm, set of 6

-€15.97

MOTION PRO Metric Socket T-Handle Set — 8 mm, 10 mm, 12 mm, 14 mm, 17 mm,...

Six-piece metric T-handle socket set with slim-profile sockets that let you start nuts hands-free. Includes vinyl storage pouch.

€45.13 €61.10

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€10.30

MOTION PRO 1/4" Hex Bit T-Handle Driver Spinner — 1/4" hex, 203.2 mm...

Bearing-mounted T-handle spinner for fast bolt and nut removal. Magnetic 1/4" hex drive holds bits securely. Bits not included.

€29.13 €39.43

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm (8.5"), chrome

-€8.56

MOTION PRO T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm...

T-handle bit driver with magnetic heads and included JIS cross-head bits #1–#3; narrow profile fits tight spaces.

€24.23 €32.79

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

-€2.52

MOTION PRO Wheel Bearing Remover — Split collet, black

Heat treated for long life; removes wheel bearings cleanly and safely for maintenance and shop use.

€7.11 €9.63

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€8.86

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.06 €33.92

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS