TOOLS

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

-€3.28

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 2041 kg (4500 lb), Black

Gentle, scratch-safe tie-down extensions ideal for bars and tight attachment points. Made in the U.S.A.

€9.30 €12.58

Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5" tie-downs, Black

-€4.94

DRAG SPECIALTIES Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5"...

Slides over existing tie-down extensions to protect paint and chrome. Made in the U.S.A.

€13.97 €18.91

-€3.08

DRAG SPECIALTIES Clear Timing Hole Plug — 41.3 mm (1-5/8"), timing mark

Locates the timing mark without getting an eye full of oil.

€8.72 €11.80

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€18.20

J. COSTA Clutch Tool — For Yamaha, Kymco, Black

Precision tool for scooter clutches and variators. Laser-cut construction with threaded studs for a secure fit.

€70.80 €89.00

CarbMate/VacuumMate™ Flexi-Rigid Manifold Adapter — Black, M5

-€3.06

TECMATE CarbMate/VacuumMate™ Flexi-Rigid Manifold Adapter — Black, M5

Flexi-rigid manifold adapter for synchronizing hard-to-reach carburetor or fuel-injection vacuum ports; bend the outer sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€3.06

TECMATE CarbMate/VacuumMate™ Flexi-Rigid Manifold Adapter — M6, Black

Flexi-rigid manifold adapter for accessing and synchronizing hard-to-reach vacuum ports; bend the outer sheath and thread the inner tube.

€11.86 €14.92

-€35.09

TECMATE CarbMate™ — 12V, 2-channel, Black

Solid-state two-input instrument with transverse 9-LED display, 0.5 cmHg accuracy, zero-adjust knob, convertible to 3–4 inputs with accessory.

€136.49 €171.58

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable for quick fluid removal.

€90.73 €122.83

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

Replacement Parts For Rk Chain Breaker/Press Fit Tool — fits clip and rivet master links, black

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — fits...

Replacement parts for chain breaker and press-fit tool with a small pressure bolt.

€7.57 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip, Rivet, Black

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip,...

Small pressure bolt for precise pressing action.

Compact replacement parts for quick maintenance and repair.

€7.57 €10.04

-€4.54

RK Small Pressure Bolt — for clip and rivet, black

Replacement pressure component for chain breaker and press-fit tools that supplies controlled, consistent pressure for master link work.

€13.86 €18.40

-€2.47

RK Replacement Parts for RK Chain Breaker/Press Fit Tool — Clip,...

Replacement cut pin holder for chain breaker and press-fit tools; secures and guides pins for easy removal and installation.

€7.57 €10.04

Replacement Parts for RK Chain Breaker/Press Fit Tool — Cutting pin, clip/rivet fitment

-€2.47

RK Replacement Parts for RK Chain Breaker/Press Fit Tool —...

Replacement part for chain breaker and press-fit tools. Small pressure bolt for controlled force.

€7.57 €10.04

Chain Tool Kit — Black, Red, UCT2100(50)

-€23.66

RK Chain Tool Kit — Black, Red, UCT2100(50)

Complete chain tool kit for pressing, riveting, flaring, cutting and breaking 40 & 50 type chains. Includes pins, holder plates and pressure bolts. Not compatible with 530PRODR; 420/428 rivet requires additional parts.

€72.20 €95.86

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Black, clip, rivet

-€4.54

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Black,...

Replacement small pressure bolt for RK chain breaker/press-fit tools.

€13.86 €18.40

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS