TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

-€7.24

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€17.71 €24.95

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€28.02

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€109.19 €137.21

-€7.40

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.09 €25.49

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€27.58

PSR Roll-On Wheel Chock — 16"–21" wheel fit, front mounting

Heavy-duty, sturdy design. Fits wheels 16"–21".

€107.26 €134.84

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

Insulated Ratchet Set — Orange, Red, Set

-€96.31

WERA Insulated Ratchet Set — Orange, Red, Set

Insulated Zyklop VDE ratchets, sockets and extensions tested for safe use up to 1000 volts. 80-tooth fine-toothed ratchet, slim ergonomic grip and compact textile box with rotating socket holders.

€235.32 €331.63

-€14.75

PSR Econo Rear Stand — Adjustable 13.75–15 in, White powder-coated

Universal rear stand for swingarms with spools. Adjustable width 13.75"–15". Mild-steel construction. Optional non-spool hardware sold separately (sold in pairs).

€57.36 €72.11

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

-€22.17

PSR Deluxe Rear Wheel Stand — 5-1/2" (13.97 cm), Black, Rear

Rear stand with included spooled lifting hardware, tool-less adjusters, and large wheels for easy rolling.

€86.23 €108.40

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

-€13.88

PSR MX Lite Lift Stand — Black, powder-coated

Simple, light and durable stand for dirtbikes. Rubber padded lifting platform protects the frame and gives secure contact.

€53.98 €67.86

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€2.40

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€5.88 €8.28

-€2.72

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€6.63 €9.35

-€3.46

WERA Insulated Screwdriver — Orange

Insulated VDE blades for work up to 1000 volts; smooth hard and soft grip zones, Take ist easy color coding, hexagonal anti-roll and reduced shaft diameter.

€8.48 €11.94

-€4.69

WERA Insulated Screwdriver — Orange

VDE-insulated blades rated for 1,000 V.
Multi-zone handle for fast turning and high torque transfer.
Color-coded end caps and hexagonal anti-roll feature.
Reduced shaft diameter for tight access.

€11.45 €16.14

-€2.07

WERA Insulated Screwdriver — 05006170001, Orange

Insulated VDE blades rated to 1000 volts. Smooth hard zones for speed and soft grip zones for torque transfer. Hexagonal anti-roll and reduced shaft diameter for precise work.

€5.05 €7.12

Out of Stock

WERA Insulated Screwdriver

The Insulated Screwdriver features VDE blades for safe use at 1000 volts, ergonomic grip zones for torque transfer, and an anti-roll design.

€5.40

-€4.40

WERA Insulated Nutdriver — 8 mm, orange, red

Insulated nutdriver with VDE blades rated to 1000 volts, multi‑component handle for high torque transfer, handle markings and hexagonal anti‑roll feature.

€10.74 €15.14

-€4.85

WERA Insulated Nutdriver — 9 mm, orange

VDE-insulated blades rated to 1000 V; multi-density handle with hard and soft zones for speed and torque; hexagonal anti-roll feature; zinc phosphate plated.

€11.84 €16.69

-€5.27

WERA Insulated Nutdriver — 10 mm

Insulated VDE blades rated to 1,000 volts. Multi-component Kraftform handle with anti-roll hex and zinc phosphate plated finish.

€12.90 €18.17

-€5.65

WERA Insulated Nutdriver — 11 mm, Orange

Insulated nutdriver with VDE-rated blades for safe work up to 1000 volts. Multi-component handle provides secure grip for both high-speed turning and high-torque transfer. Hexagonal anti-roll design and zinc phosphate plating enhance durability.

€13.80 €19.45

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS