TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH, KP, SD, SF, SK, ST, YH, YJ impellers

-€2.06

SOLAS Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH,...

Makes impeller installation quick and simple; match tool application to impeller series to find the proper tool.

€6.57 €8.63

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip, Rivet, Black

-€4.36

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip,...

Replacement tail piece (cut) for chain breaker/press-fit tools. Precision-cut for consistent alignment and reliable link assembly.

€5.68 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Tail Piece Press, Black, for clip/rivet

-€4.36

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Tail...

Replacement component for chain breaker and press-fit tools; improves alignment and press operations.

€5.68 €10.04

Impeller Installation Tool — fits PA, PB, PF, PL, TA, TB impellers

-€1.89

SOLAS Impeller Installation Tool — fits PA, PB, PF, PL, TA, TB...

Makes installing an impeller quick and easy.

Match the tool application to your impeller series to ensure proper fit.

€6.05 €7.94

-€4.54

RK Small Pressure Bolt — for clip and rivet, black

Replacement pressure component for chain breaker and press-fit tools that supplies controlled, consistent pressure for master link work.

€13.86 €18.40

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€2.47

RK Replacement Parts for RK Chain Breaker/Press Fit Tool — Clip,...

Replacement cut pin holder for chain breaker and press-fit tools; secures and guides pins for easy removal and installation.

€7.57 €10.04

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

Replacement Parts For Rk Chain Breaker/Press Fit Tool — for master link connectors clip and rivet, Steel

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — for...

Replacement parts for chain breaker and press-fit tools. Precision components to maintain alignment and extend tool life.

€7.57 €10.04

Chain Tool Kit — Black, Red, UCT2100(50)

-€23.66

RK Chain Tool Kit — Black, Red, UCT2100(50)

Complete chain tool kit for pressing, riveting, flaring, cutting and breaking 40 & 50 type chains. Includes pins, holder plates and pressure bolts. Not compatible with 530PRODR; 420/428 rivet requires additional parts.

€72.20 €95.86

Chain Tool Kit — Clip and Rivet fitment, Black

-€4.54

RK Chain Tool Kit — Clip and Rivet fitment, Black

Versatile chain tool kit that breaks 40 & 50 chains, press-fits O-ring sideplates to the correct depth, and rivets links. Includes cutting and riveting pins and holders. Cannot press-fit or rivet 530PRODR; 420/428 rivet adapters sold separately.

€13.86 €18.40

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA, 31021

Foldable silicone tray with an embedded magnet in the base to secure it to metal surfaces.

€12.39 €16.77

Chain Tool Kit — 500/520/525/530/532, clip & rivet, black

-€4.54

RK Chain Tool Kit — 500/520/525/530/532, clip & rivet, black

Precision chain tool kit that press-fits tight-tolerance O-ring sideplates, breaks 40 & 50 chains, and installs clip or rivet master links. Complete kit includes body, pressure bolts, cutting pin and holder, plate holder, tail pieces, and flare pin. Cannot press-fit 530PRODR; riveting 420/428 requires FP428JP & PH428.

€13.86 €18.40

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA

Foldable silicone tray with an embedded magnet in the base for secure placement on metal surfaces. Compact and portable.

€12.39 €16.77

Chain Tool Kit — 420, 428, 400 chain sizes, clip or rivet fitment

-€4.54

RK Chain Tool Kit — 420, 428, 400 chain sizes, clip or rivet fitment

Heavy‑duty chain tool kit for 40 & 50 chains. Press‑fits O‑ring sideplates, breaks chains, and flares rivet links. Complete set of bolts, pins and plates. Not compatible with 530PRODR. Some 420/428 rivet operations require FP428JP and an adapter (sold separately).

€13.86 €18.40

Weatherproof permanent battery lead, powersport — 10 A, Black, Red

-€3.96

TECMATE Weatherproof permanent battery lead, powersport — 10 A, Black,...

Permanent weatherproof battery lead for powersport vehicles; provides a secure, low-profile permanent connection.

€8.50 €12.46

Charging Cable Extender — 2.5 m, compatible with pre-2015 AccuMate and pre-2012 OptiMate

-€4.49

TECMATE Charging Cable Extender — 2.5 m, compatible with pre-2015...

2.5 m extension cable with SAE connectors to extend charger reach; compatible with pre-2015 AccuMate and pre-2012 OptiMate.

€9.64 €14.13

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS