TOOLS

-€4.10

BIKE LIFT Flange Adapter — for Minarelli engines

Precision flange adapter for Minarelli engines. Machined steel construction for secure fit; simple installation.

€14.90 €19.00

-€4.10

BIKE LIFT Flange Adapter — For Piaggio engines

Precision flange adapter for Piaggio engines. Durable steel construction; easy to install.

€14.90 €19.00

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€35.50

BIKE LIFT Folding Ramp — 240 cm L, 28 cm W, 275 kg capacity

Makes loading and unloading your bike easier. 275 kg capacity. Measures 240 cm L x 28 cm W. Includes tie-down and rubber-coated hook.

€128.94 €164.44

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

-€7.24

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€17.71 €24.95

-€7.40

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.09 €25.49

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€89.22

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 €436.19

Replacement Puller Plate — Black, Chrome

-€21.50

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 €105.13

-€43.41

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€168.77 €212.18

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

-€21.10

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€82.06 €103.16

-€42.16

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€163.95 €206.11

Automatic Wheel Clamp — Motorcycle, Black

-€40.85

BIKE LIFT Automatic Wheel Clamp — Motorcycle, Black

Automatic wheel clamp for secure positioning on bike lifts and safe transport on trucks or trailers.

€158.84 €199.69

-€4.30

BIKE LIFT Automatic Wheel Clamp — Black

Secure, easy-to-fit wheel clamp with a patented locking mechanism. Compatible with bike lifts; mountable on trucks or trailers.

€16.70 €21.00

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS