TOOLS

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

-€7.24

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€17.71 €24.95

-€7.40

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.09 €25.49

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

-€4.47

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€12.61 €17.08

Insulated Ratchet Set — Orange, Red, Set

-€96.31

WERA Insulated Ratchet Set — Orange, Red, Set

Insulated Zyklop VDE ratchets, sockets and extensions tested for safe use up to 1000 volts. 80-tooth fine-toothed ratchet, slim ergonomic grip and compact textile box with rotating socket holders.

€235.32 €331.63

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable oil extractor for easy fluid removal.

€90.73 €122.83

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

-€2.40

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€5.88 €8.28

-€2.72

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€6.63 €9.35

-€3.46

WERA Insulated Screwdriver — Orange

Insulated VDE blades for work up to 1000 volts; smooth hard and soft grip zones, Take ist easy color coding, hexagonal anti-roll and reduced shaft diameter.

€8.48 €11.94

-€4.69

WERA Insulated Screwdriver — Orange

VDE-insulated blades rated for 1,000 V.
Multi-zone handle for fast turning and high torque transfer.
Color-coded end caps and hexagonal anti-roll feature.
Reduced shaft diameter for tight access.

€11.45 €16.14

-€2.07

WERA Insulated Screwdriver — 05006170001, Orange

Insulated VDE blades rated to 1000 volts. Smooth hard zones for speed and soft grip zones for torque transfer. Hexagonal anti-roll and reduced shaft diameter for precise work.

€5.05 €7.12

WERA Insulated Screwdriver

The Insulated Screwdriver features VDE blades for safe use at 1000 volts, ergonomic grip zones for torque transfer, and an anti-roll design.

€5.40

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS