TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Removable Wheel Chock — 6-1/2" tire width, front mount, chrome

-€23.34

PINGEL Removable Wheel Chock — 6-1/2" tire width, front mount, chrome

Removable wheel chock stabilizes the front wheel for transport; mounting brackets stay attached while the chock is easily removed.

€90.76 €114.10

Professional-Grade Clutch Holder Tool — inner hub 2-7/8"–4-3/4", Silver

-€40.91

HINSON RACING Professional-Grade Clutch Holder Tool — inner hub...

Universal clutch holder for inner hub diameters 2-7/8"–4-3/4"; screw-adjust fit with removable handle; made in USA.

€159.09 €200.00

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€15.61

PINGEL Cylinder Head Stand — Yellow, Pair

Secure two-support mounting for cylinder head work; made in the U.S.A.

€60.72 €76.33

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€38.54

PINGEL Wheel Chock for Corrugated Floors — 3.5" tire width, Chrome

Removable wheel chock designed for corrugated truck and van beds; includes mounting kit. Made in the U.S.A.

€149.90 €188.44

Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

-€24.05

PINGEL Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

Stabilizes the front wheel for trailer transport; brackets stay in place while the chock is removed via a T-bolt hold-down screw. Made in the USA. Additional mounting kits sold separately.

€93.56 €117.61

$Bungee Net — 38 cm (15\"), Black$

-€0.85

EMGO Bungee Net — 38 cm (15\"), Black

Holds gear securely for travel and hauling.
Expands for flexible coverage.
Six coated hooks protect finishes.

€2.40 €3.25

-€0.87

EMGO Bungee Net — 38 cm (15 in), red

Versatile bungee net that stretches to secure loads, featuring six coated non-abrasive hooks.

€2.44 €3.31

-€0.87

EMGO Bungee Nets — 15" square, Blue

Versatile bungee cargo net with six coated hooks that stretches to secure varied loads.

€2.44 €3.31

-€4.38

DAYTONA Magnetic Silicone Tray — Orange

Foldable silicone tray with embedded magnet to keep small metal parts organized.

€12.39 €16.77

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA

Foldable silicone tray with an embedded magnet in the base for secure placement on metal surfaces. Compact and portable.

€12.39 €16.77

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus, ABS

Compact PC-compatible scan tool with ECM programming, ABS support, stand-alone data logging, analog inputs, and speedometer/idle recalibration.

€637.33 €801.21

-€4.62

EMGO Tire Lever Set — Gold, Pair

Two-piece set with built-in wrench sizes for emergency tire repairs; compact for adventure touring and trail use.

€13.07 €17.69

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire width, front mount, chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire...

Removable wheel chock that stabilizes the motorcycle front wheel for trailer transport; patented mounting bracket; tie-down fitting sold separately.

€228.55 €287.31

Removable Series E-Track Wheel Chock — 3-1/2" tire width, front mount, Chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" tire width,...

Portable wheel chock that slides along the Series E Track to stabilize the front wheel during transport; tie-down fitting sold separately.

€228.55 €287.31

Removable Series E-Track Wheel Chock — 6-1/2" tire width, Front mount, Chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width,...

Flexible placement along the track for multiple bikes.

Stabilizes wheel for trailer transport.

Patented bracket; tie-down fittings sold separately.

€228.55 €287.31

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width, Chrome

Removable wheel chock stabilizes the motorcycle wheel and lets you reposition the chock and tie-downs along the track; tie-down fitting sold separately.

€228.55 €287.31

-€6.53

PINGEL Removable Tie-Down Fitting for E-Track — O-ring end

Quick-install removable tie-down fitting for Series E tracks; sold individually.

€25.42 €31.95

Additional Mounting Plate Kit — Wheel chock mounting kit, center mount, silver

-€21.90

PINGEL Additional Mounting Plate Kit — Wheel chock mounting kit,...

Additional mounting plate with hardware for removable chocks; made for corrugated or textured floors; made in the U.S.A.

€85.18 €107.08

Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

-€14.52

PINGEL Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

Mounts in any bench vise and holds the cylinder head securely for all types of head work; shaft includes a drilled hole for wall storage; made in the U.S.A.

€56.44 €70.96

-€7.71

EMGO 7" Wire Pliers — 17.78 cm (7"), Black

Precision pliers for consistent wire twisting. Return-spring mechanism reduces hand fatigue for repeated use.

€21.80 €29.51

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS