TOOLS

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€108.87

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€331.14 €440.01

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€180.14

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€236.19 €416.33

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€2.60

KELLERMANN Replacement Pins for KTW 2.5 — 130.240, Steel

Precision replacement pins for KTW 2.5, compatible with pin punch 4xx, pin punch 5xx and 6xx.

€14.16 €16.76

-€5.24

KELLERMANN Upgrade set KTW 2.0 → KTW 2.5 — Black steel finish

Upgrade set for KTW 2.0 to KTW 2.5 including pin punches 4xx–6xx, fence, fixing screw and pressure screw for accurate chain work.

€28.33 €33.57

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

-€4.47

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€12.61 €17.08

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable oil extractor for easy fluid removal.

€90.73 €122.83

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

-€31.95

REGINA Compact Chain Assembly and Rivet Tool — 5/8", 520/525/530, Black

Single-tool solution for chain assembly and four-sided riveting. Durable hardened construction. Made in Italy.

€41.91 €73.86

Kellermann Ktw 2.0 Chain Tool Accessories — Roller chain, Clip/Rivet, Black

-€7.18

KELLERMANN Kellermann Ktw 2.0 Chain Tool Accessories — Roller chain,...

Magnetic positioning device for Ktw 2.0 and Ktw 2.5; simplifies master link alignment during assembly and press operations.

€39.00 €46.18

Kellermann Ktw 2.0 Chain Tool Accessories — Roller chain, Clip/Rivet master link, Black, Steel

-€3.25

KELLERMANN Kellermann Ktw 2.0 Chain Tool Accessories — Roller chain,...

Rivet head molder extension set for creating full rivet locks; quick guide swap and bolt-driven forming for reliable chain connections.

€17.72 €20.97

Regina Professional Chain Assembly Tool — roller chain, master link clip or rivet

-€2.06

REGINA Regina Professional Chain Assembly Tool — roller chain, master...

Professional assembly tool set for sealed chains. Works with press-fit and rivet links. Includes 1/2" and 5/8" tools. Made in Italy.

€3.23 €5.29

Regina Professional Chain Assembly Tool — 1/2" (420, 428), 5/8" (520, 530)

-€18.06

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional tool for assembling sealed chains; fits 420/428 (1/2") and 520/530 (5/8"). Made in Italy.

€54.97 €73.03

Regina Professional Chain Assembly Tool — Roller chain, rivet connector, steel

-€109.79

REGINA Regina Professional Chain Assembly Tool — Roller chain, rivet...

Professional assembly tool for sealed chains. Works with press-fit and rivet links. Sizes: 1/2" for 420/428, 5/8" for 520/530. Made in Italy.

€333.91 €443.70

-€17.15

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional assembly tool for Regina sealed chains. 1/2" for 420–428 and 5/8" for 520–530. Made in Italy.

€52.17 €69.32

Regina Compact 5/8" Chain Assembly And Rivet Tool — Roller chain, Steel, Specialty tool

-€8.06

REGINA Regina Compact 5/8" Chain Assembly And Rivet Tool — Roller...

Compact single-tool solution for assembling and four-sided riveting of Regina 520/525/530 O- and Z-ring chains. Affordable alternative to two-piece tools; made in Italy.

€10.77 €18.83

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS